ESB 9.1T-25 Novemila Series 1 Inch High End Silk Dome Tweeter 100w RMS Pair
Couldn't Load Pickup availability
9.1T-25
1"/25 mm High-End Dome Tweeter
Silk dome impregnated with resin with integrated suspension. This dome is made in a single piece that also includes the suspension. This greatly reduces weight allowing the tweeter to reproduce very high frequencies. The absence of joints prevents break-up and/or vibration phenomena.
Magnet made from N52H neodymium, best both for the magnetic force in relation to the mass, and for high temperature support (120° F vs. 80° F of a standard neodymium magnet).
The pole cup has twelve axial holes in the bottom to eliminate the air back pressure caused by the movement of the dome. This solution helps to reduce the distortion that would inevitably be generated due to the deformation of the delicate silk dome, and also helps to reduce the tweeter frequency resonance.
The back of the tweeter includes a threaded hole that greatly increases the installation possibilities in unconventional locations inside cars. Wide 25 mm lightweight aluminum voice coil with aluminum copper clad winding contributes significantly to the large bandwidth extension of this tweeter. Magnet plate made of ultra-low-carbon steel. Main body made in ABS.
The connecting cables are super flexible with high silver content to reduce electrical connection losses. Gold-plated copper terminals. Felt damper for controlling and reducing dome resonance. Light stainless steel grill for dome protection.
Specification
| Nominal Impedance | 4 Ohm |
|---|---|
| Nominal Power Handling | 100 Watt |
| Transient Power | 200 Watt |
| Frequency Response | 1.6 KHz ~ 25 KHz |
| Sensitivity | 91.5 dB 2.83v/1m |
What's Included
- ESB 9.1T-25
FAQs
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
About the brand
ESB Audio
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
