Bloc Power B2 8000mAh Dash Cam Battery for Extended Parking Mode 35 Hours
Pickup Currently Unavailable at CEN
Bloc Power – Battery Pack B2 – BlackVue Battery Pack – 8000mAh
BLOC POWER is a dedicated power solution designed to extend your dash cam’s parking mode recording—without draining your vehicle’s battery. Instead of relying on your car overnight, BLOC POWER delivers clean, stable power to your dash cam, protecting your vehicle’s battery and ensuring reliable performance.
Features
- High-capacity LiFePO₄ battery technology – 8000 AH 102 WH
- 1CH 35 Hours run time – 2 CH 22 Hours Run Time Aprox
- Fast charging while driving
- Extended dash cam parking mode recording
- LCD status display
- Adjustable power timer
- 2 × USB-A fast-charging ports (up to 20W)
- 1 × USB-C PD fast-charging port (up to 45W)
- Built-in LED torch & emergency light
HOW A BLOC POWER BATTERY WORKS
When your vehicle is running, the ACC (accessory) power source charges the BLOC POWER battery and your dash cam. When the ignition is switched off, ACC power stops and BLOC POWER automatically takes over—maintaining continuous power to your dash cam.
- An intelligent built-in voltage detection system monitors
- engine status in real time, enabling seamless switching
- between driving and parking modes without user input.
- In conventional installations, where the dash cam draws
- directly from the vehicle’s main battery, recording time is
- typically limited to 1–3 hours – often less depending on
- battery condition. This is rarely sufficient for overnight protection.
With BLOC POWER integrated into your system, parking mode recording time is significantly extended (see Runtime Guide on page 4), while eliminating drain on your vehicle’s battery. This supports reliable engine starts and helps preserve long-term battery health.
BLOC POWER also reduces the risk of interference with sensitive onboard electronics, including the ECU, thanks to its isolated power architecture. Installation is simpler than traditional hardwiring, with enhanced control and power management throughout
BLOC POWER BATTERY RUNTIME
Your BLOC POWER battery can power your dash cam in Parking Mode for up to 35 hours (B2) or 50 hours (B3). Actual run times will vary depending on the dash cam model, number of channels, and user settings.
The table below provides an approximate guide for typical single and dual channel dash cam systems.
EXPANSION
BLOC POWER features expandable power capability for extended performance. By connecting a second battery pack, total capacity and Parking Mode recording time can be increased.
A maximum of two batteries can be linked. B2 model can be combined within the same setup.
To connect two batteries, the optional BLOC POWER Expansion Cable is required.
Specification
Part Number: B2
- Battery type: LiFePo4 – Lithium Iron Phosphate
- Capacity: 8,000 mAh/102.4Wh
- Display: 1.65” LCD
- Casework Material: Flame-resistant aluminium alloy and ABS
- ACC Input: 12V/4-8A
- DC Input: 12V/4-8A
- USB-A output: 5–12V - up to 20W
- USB-C input/output: 5–20V - up to 45W
- Operating temperature: 0°C - 45°C
What's Included
2 Year Warranty
- BLOC POWER battery pack (B2)
- Hardwire Input/Output Cable
- 12V Cigarette lighter socket power cable
- Cigarette lighter socket output adaptor
- Velcro strips x 2
- User guide
About the brand
Bloc Power
New Arrivals
The latest product releases
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
