


Audison Prima AP 5 5" 13cm 130mm Car Woofer Dash Door Speakers 50w RMS Pair
Couldn't Load Pickup availability
The Audison Prima AP 5 is a 5" (130 mm) car woofer rated at 50 W RMS / 150 W peak, with 4 ohm impedance. It's part of Audison's Prima range, designed for OEM dash and door installations.
This listing is the AP 5 (5"). The Audison Prima woofer range is also available in 4" (AP 4, 40 W RMS).
Key specifications
- Size: 130 mm (5")
- Power handling: 50 W RMS, 150 W peak
- Impedance: 4 ohms
- Frequency response: 70 Hz – 5 kHz
- Sensitivity: 93 dB
- Voice coil: 32 mm pure copper
- Cone: Water-repellent treated paper
- Fs: 90 Hz
Audison Prima
Audison Prima is built for enthusiasts who want accurate sound reproduction with components that integrate cleanly into a car's OEM system. The range prioritises OEM space constraints throughout.
The AP 5 uses a 32 mm pure copper voice coil for high power handling and low-frequency control. No passive crossover is needed — the cone profile has been optimised using the Klippel Scan Vibrometer to achieve a calibrated mechanical low-pass cut-off frequency, maximising efficiency.
- 32 mm pure copper voice coil for high power handling and low-frequency control.
- Water-repellent treated paper cone, developed using FEM (Finite Element Method) simulation and optimised with the Klippel R&D Scan Vibrometer.
- No passive crossover required — cone profile provides a calibrated mechanical low-pass cut-off frequency.
- Reduced mounting depth for straightforward OEM dash and door installation.
- TPU (thermoplastic polyurethane) surround with "triple wave" profile for maximum excursion linearity.
- Compact basket with abrasion-resistant, scratch-proof coating; motor secured with damping epoxy adhesive.
- High-current fast-on terminal with double contact on positive and negative poles for flexible, quick connection.
- Temperature-resistant plastic terminal cover protects against accidental short circuits.
- Developed using the Klippel suite.
Explore the full range in Audison Prima.
Specification
| Power Handling | - Peak 150 W |
|---|---|
| Power Handling | - Continuous 50 W |
| Impedance | 4 Ohm |
| Frequency Response | 70 ÷ 5k Hz |
| Voice Coil | Ø 32 mm |
| Weight | 0.65 kg |
More specs
| |
What's Included
- Audison AP 5 Prima Speakers
Audison
About the Audison AP 5
From our tech experts at CEN
Audison Prima midrange drivers, 5 inch, handling 50w RMS, built to cover one band in a multi-way front stage.
Who it suits
Drivers building an active or multi-way system where each driver has a defined job and a processor sets the crossover points. Prima is the accessible end of the Audison range and still built to the same thinking.
Our tech experts advise
Drivers like this assume amplification and processing: the crossover points and mounting locations matter as much as the hardware. get in touch and we will help specify the front stage. See car audio installation.
Explore the full Audison range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Audison
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: Does the Audison AP 5 need a crossover?
A: No passive crossover is required. The cone is optimised to give a calibrated mechanical low-pass cut-off, which maximises efficiency.
Q: What size and power rating is the AP 5?
A: It is a 130 mm (5 inch) woofer rated at 50 W RMS and 150 W peak, with 4 ohm impedance and a 70 Hz to 5 kHz response.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
































