Audison Prima AP 2 MV Wide Range 2 Inch 5cm Component Dash Door Speakers 25w RMS

The Audison Prima AP 2 MV is a 50 mm (2 inch) wide-range component speaker with a 25 W RMS (50 W peak) power handling, 4 ohm impedance and a 150 Hz to 20 kHz frequency response, part of the Audison Prima range.

This listing is for the AP 2 MV (2 inch). The Audison Prima wide-range speaker range is also available in 4 inch (AP 4).

Key specifications

• Size: 50 mm (2 in)
• Power handling: 25 W RMS, 50 W peak
• Impedance: 4 ohms
• Frequency response: 150 Hz to 20 kHz
• Sensitivity: 84 dB
• Voice coil: 25 mm CCAW, double layer
• Magnet: Double symmetrical neodymium
• Cone: Aluminium, with copper shorting ring
• Fs: 145 Hz

AP 2 MV wide-range component

Mid range, 50 W peak power, 50 mm, 4 ohm

Multi-tab OEM adapter

Designed for OEM placements in the dashboard or A-pillar, where it is combined with an elliptical woofer in the car door. The included adapter allows direct OEM replacement in many General Motors, Toyota and Mercedes vehicles.

Its compact size and electroacoustic performance also make it suitable as a midrange in 3-way systems, as a surround speaker or as a centre channel — useful wherever space prevents a larger-diameter driver.

• Ultra-wide frequency response from 150 Hz to 20 kHz, concentrating the virtual stage across the top of the dashboard.
• 25 mm (1 in.) CCAW double-layer voice coil for strong power handling and low-frequency extension.
• Double symmetrical neodymium magnet assembly for optimal excursion control.
• Aluminium cone and copper shorting ring extend high-frequency response to 20 kHz.
• Ultra-compact basket and neodymium motor designed specifically for dashboard and A-pillar OEM installations.
• Supplied adapter for direct OEM replacement in many General Motors, Toyota and Mercedes vehicles.

Reproducing the full frequency spectrum from a single speaker delivers absolute phase coherence, creating a wide acoustic stage concentrated at the top of the dashboard with very low distortion and no crossover point in the mid-high range.

The resonance frequency of 145 Hz — low for a 50 mm driver — is achieved using a 25 mm (1 in.) voice coil, giving controlled low-frequency extension and an optimal crossover point with the woofer.

The aluminium cone and copper shorting ring flatten impedance and extend response to 20 kHz. The double symmetrical neodymium magnet contributes to high-frequency extension while keeping overall dimensions very compact.

This electroacoustic configuration produces the wide 150 Hz to 20 kHz frequency response that gives the AP 2 MV its wide-range designation.