Shop All

Audison Prima APX 690 6x9" Car Coaxial Midbass Shelf Door Speakers 100w RMS Pair

RRP £179.99 £169.99 Save 6%
In stock
SKU: 90230MPN: APX 690
Part of the range · 53 productsPart of the Audison Prima range · 53 products See the range →

The Audison Prima APX 690 is a pair of 6x9-inch coaxial speakers from the Audison Prima range, rated at 100W RMS (300W peak) with 96dB sensitivity. They feature a 40mm horn-loaded dome tweeter with acoustic lens and a 15mm PEI super tweeter, and are designed to upgrade factory 6x9-inch rear shelf or door speakers.

This listing is the 6x9-inch coaxial. The Audison Prima coaxial range is also available in 6.5-inch (APX 6.5).

For a 6x9-inch component set with separate tweeters, see the Audison Prima APK 690.

Key specifications

  • Size: 6x9 inch elliptical coaxial
  • Tweeter: 40mm horn-loaded dome with acoustic lens
  • Super tweeter: 15mm PEI
  • Power: 100W continuous / 300W peak
  • Impedance: 4 ohms
  • Frequency response: 40Hz–23kHz
  • Sensitivity: 96dB

Prima APX 690: Coaxial, 300W Peak Power, 6″ x 9″, 4 ohm

The APX 690 features a 40mm horn-loaded dome tweeter for efficiency up to 96dB SPL, plus an acoustic lens designed to increase high-frequency dispersion.

  • 40mm horn-loaded dome tweeter delivering up to 96dB SPL sensitivity.
  • Acoustic lens on the tweeter to increase dispersion in the high-frequency range.
  • 15mm PEI (polyethylene injected) super tweeter strengthens very high-frequency emission, particularly useful for rear deck installations where off-axis positioning is common.
  • Water-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and optimised with the Klippel Scan Vibrometer.
  • Pure copper voice coil wound on a Kapton former for improved thermal and mechanical capacity.
  • TPU (thermoplastic polyurethane) surround with a "triple wave" profile for maximum linearity of excursion.
  • Polycotton spider for reliable performance and linear response to musical transients.
  • Large motor assembly optimised with FEM technology for stable control and linear excursion.
  • Low carbon content plates for maximum magnetic permeability and high heat dissipation.
  • Compact basket with abrasion-resistant, scratch-proof coating; motor affixed with damping epoxy adhesive.
  • High-current fast-on terminals with temperature-resistant plastic covers to guard against accidental short circuits.
  • Developed using the Klippel suite.
Specification
Size6x9 Inch
ShapeOval
TypeCoaxial
SeriesPrima
Article NumberAPX 690
Country of ManufactureChina
More specs
  • Woofer Size    6 x 9 in (elliptical)
  • Tweeter Size    40 mm
  • Super Tweeter Size    15 mm
  • Woofer Power Handling - Peak    300 W
  • Woofer Power Handling - Continuous    100 W
  • Woofer Impedance    4 Ohm
  • Woofer Frequency Response    40 - 23k
  • Woofer Magnet Size    90 x 32 x 15
  • Woofer Voice Coil Diameter    25 mm
  • Tweeter Voice Coil Diameter    20 mm
  • Xmax    3.5 mm
  • D    171 mm
  • Re    3.2 Ohm
  • Fs    60 Hz
  • LE standard    0.2
  • Vas    36 l
  • Mms    16.6 g
  • Cms    0.5
  • Bl    5.3
  • Qts    0.6
  • Qes    0,7
  • Qms    6.7
  • Woofer Spl    96 dB
What's Included
  • Audison Prima APX 690 Speakers
Product information

Audison

About the Audison APX 690

From our tech experts at CEN

Audison Prima 6x9 inch coaxial speakers, with the tweeter in the centre of the woofer, rated at 100w RMS.

Who it suits

Drivers replacing tired factory speakers who want a clear improvement without relocating tweeters. Prima is the accessible end of the Audison range and still built to the same thinking.

Our tech experts advise

Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering. Door treatment matters as much as the speaker, and Audison drivers repay amplification and tuning. Installation and tuning are priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Audison range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Audison

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: Why does the APX 690 have a super tweeter?

A: The PEI super tweeter strengthens the very high frequencies that are otherwise lost when speakers are mounted off-axis to the listener, as is common on rear shelves.

Q: How much power can the APX 690 handle?

A: It is rated at 100W continuous and 300W peak, with a 4 ohm impedance. Its 96dB sensitivity means it also works well from lower-powered sources.