





Alpine SWE-815 Subwoofer Amplified Powered Active Sub with Wired Remote 100w RMS
Couldn't Load Pickup availability
The Alpine SWE-815 is a compact 8-inch (20cm) amplified subwoofer box with a built-in 150W amplifier, 100W RMS output and a wired remote control. It is part of Alpine's SWE range and is designed for drivers who want to add bass that plugs straight into their existing system with no extra amplifier needed.
It accepts both RCA and speaker-level inputs, and a removable port plug allows sealed or vented operation.
Key specifications
- Subwoofer: 8-inch (20cm) customised SWE-843E
- Power handling: 100W RMS, 300W peak
- Built-in amplifier: MXE-M150CKD, 150W max
- Frequency response: 34Hz to 1.5kHz
- Low-pass filter: 50 to 125Hz at -12dB/oct, adjustable from the wired remote
- Inputs: RCA and speaker level
- Enclosure: bass reflex, slot vented, removable port plug for sealed operation
- Dimensions: 288mm (W) x 291mm (H) x 253mm / 363mm (D)
Ready-to-use amplified subwoofer box
The Alpine SWE-815 is a compact, self-contained subwoofer that plugs straight into your existing system with no extra amplifier needed.
8" (20cm) Amplified Subwoofer Box SWE-815
- 8-inch (20cm) SWE subwoofer with built-in 150W amplifier
- 100W RMS continuous output
- Wired remote control included: adjust level, phase and low-pass frequency (50 to 125Hz at -12dB/oct)
- Port plug included for sealed or vented operation
Explore the full range in Alpine Subwoofers.
Specification
| Frequency Response | 34Hz - 1.5kHz |
|---|---|
| Impedance | 2x 2Ω |
| Sensitivity | 91.0dB/W(1m) |
| Dimensions | 288mm (W) x 291mm (H) x 253mm / 363mm (D) |
More specs
| |
What's Included
- Alpine SWE-815
- Remote level control with cable attached
- RCA & Speaker Inputs
- Wiring Kit
Alpine
About the Alpine SWE-815
From our tech experts at CEN
An active subwoofer with the amplifier built in, rated at 100w RMS, so you get bass from one compact unit rather than a separate sub, amp and enclosure.
Who it suits
Drivers who want more low end without rebuilding the system or losing the boot. Powered units suit cars where space is tight, and anyone who wants bass but not a competition install.
Our tech experts advise
It still needs a proper fused feed from the battery and a signal source, which is where most DIY attempts come unstuck. Setting level and crossover against your existing speakers is what makes it blend. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs and what the work involves. See car audio installation.
Explore the full Alpine range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Alpine
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: Does the Alpine SWE-815 need a separate amplifier?
A: No. It has a built-in MXE-M150CKD amplifier (150W max) driving the 8-inch subwoofer at 100W RMS, and a wiring kit is included.
Q: Will the Alpine SWE-815 work with a factory stereo?
A: Yes. It has both RCA and speaker-level inputs, so it can connect to aftermarket head units with RCA outputs or to factory systems via the speaker inputs.
Q: What can I adjust with the SWE-815 wired remote?
A: The included wired remote lets you adjust the bass level, phase and low-pass frequency (50 to 125Hz at -12dB/oct).
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →
Car Audio
Audison Prima APBX 10 AS2 Review: Compact Active Bass Done Properly
Read more →






































