





Alpine R2-A60F Amplifier 4 Channel Class D Stereo Speaker Power Car Amp 600w RMS
Couldn't Load Pickup availability
The Alpine R2-A60F is a 4-channel Class D car amplifier from Alpine's R-Series, delivering 4 x 150W RMS at 2 ohms (4 x 100W RMS at 4 ohms) with Hi-Res Audio certification and flexible 4, 3 or 2-channel operation.
Key specifications
- Channels: 4/3/2 channel, Class D
- Power at 2 ohms: 4 x 150W RMS
- Power at 4 ohms: 4 x 100W RMS
- Bridged (4 ohms): 2 x 300W RMS
- Frequency response: 10Hz–45kHz (Hi-Res Audio certified)
- Crossover: variable HPF/LPF 50–400Hz, HPF-HI 400Hz–6kHz, band-pass
- Inputs: RCA and speaker level with automatic power on
- Heat sink (W x H x D): 282 x 55 x 165mm
- Weight: 3.3kg
Alpine R-Series amps: built to be played loud
The R-Series range of speakers, subwoofers and amplifiers has a strong heritage of sound quality, and the R2-A60F continues that tradition. These amplifiers are tuned to complement R-Series speakers and subwoofers, with a 15% reduced footprint compared to previous models for easier installation.
The R2-A60F reproduces high-frequency sounds up to 45kHz and is Hi-Res Audio compliant. Alpine has incorporated technology from its top-of-the-line amplifiers into this unit, including high-efficiency transformers, premium low-noise custom capacitors, and low-distortion dual "Sierra" feedback/correction circuitry.
At 100W RMS per channel at 4 ohms, the R2-A60F matches the power ratings of Alpine's R-Series speakers. In 3-channel mode, the front channels drive a speaker pair while the bridged rear channels deliver up to 300W RMS to a subwoofer. Class D technology keeps the unit compact enough to fit in almost any location. R-Series amplifiers are available in two mono and one 4-channel configuration.
Hi-Res Audio certified
The R2-A60F is Hi-Res Audio certified with a frequency response up to 45kHz, bringing music closer to the original source. The wide bandwidth is paired with the "loud and fun" character that R-Series is known for.
Reduced footprint
The R2-A60F is 15% smaller than its predecessor (R-A60F), making it easier to install across most vehicle applications without compromising on output.
Extensive tuning options
Variable high-pass filters remove extreme low bass from full-range speakers for greater efficiency. Low-pass filters can be adjusted for subwoofer use to dial in the right bass tone. Band-pass filter operation is also available, allowing the R2-A60F to power tweeters and midrange drivers while a separate mono amplifier — such as an Alpine R2-A75M 750W or R2-A150M 1500W — handles subwoofer duties. An optional Alpine RUX-KNOB2 remote bass level control is available for compatible R-Series amplifiers.
Trickle-down technology
Design and performance cues from Alpine's Ultra-High-Resolution F#1Status system have been carried down into the R-Series, giving these amplifiers high-resolution playback capabilities that push the range's performance further.
Simplified installation
All speaker connections are consolidated on one side of the chassis. Gain and crossover controls sit on the top of the unit under a removable plate for easy access. Mounting brackets are integrated directly into the chassis.
Explore the full range in Alpine R2 Series.
Specification
| Terminal Layout | One side |
|---|---|
| Channel Design | 4/3/2 Channel |
| Crossover | Adjustable Low-pass (LPF), High-Pass Filter (HPF), High-Pass Hi Filter (HPF-HI) and Band-Pass Filter |
| Total Max Power | 1200W |
| Bridged, 4 Ohms, 14.4V | 2 x 300W |
| Crossover | Variable HPF/LPF: 50-400Hz (-12dB/oct ) |
| Crossover | Variable HPF-H: 400Hz-6kHz |
| Power Requirements | 14.4 V.DC (9 - 16 V allowable) |
| Input Sensitivity (RCA Input) | Hi: 0.5V - 10V / Low: 0.2V - 4.0V |
| Cable size | Power Cable AWG 4, SPK Cable AWG 8 |
| Frequency Response | 10Hz – 45kHz |
| THD+N (@ 10W into 4 Ohms) | <0.03% |
| Damping Factor | >100 |
| Weight | 3.3kg |
| Heat Sink (WxHxD) mm | 282 x 55 x 165 |
More specs
| |
What's Included
- Alpine R2-A60F Amplifier
Alpine
About the Alpine R2-A60F
From our tech experts at CEN
A 4-channel amplifier, Class D, rated at 600w RMS. Enough channels to run a front and rear stage, or a front stage with the rears bridged for a sub.
Who it suits
Drivers who have upgraded their speakers and found the head unit cannot drive them properly. This is the step that makes good speakers sound like good speakers. Amplification is also what turns a van or camper system from loud into clear.
Our tech experts advise
Power ratings only mean something when the amplifier is matched to the speakers and the gains are set with a meter rather than by ear. It needs a properly fused feed from the battery on the right gauge cable, which is the part we see done badly most often. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs and what the work involves. See car audio installation.
Explore the full Alpine range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Alpine
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How much power does the Alpine R2-A60F produce?
A: It delivers 4 x 100W RMS at 4 ohms, 4 x 150W RMS at 2 ohms, or 2 x 300W RMS bridged into 4 ohms, all at 14.4V.
Q: Can the R2-A60F power a subwoofer as well as speakers?
A: Yes. In 3-channel mode the front channels drive a pair of speakers while the rear channels are bridged to send up to 300W RMS to a subwoofer. It is also Remote Bass Control (RUX-KNOB2) ready for channels 3 and 4 in bridged mode.
Q: Is the R2-A60F Hi-Res Audio certified?
A: Yes. It is Hi-Res Audio certified with a frequency response of 10Hz to 45kHz.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →



































