Shop All

Alpine 6 Channel DSP Amplifier, Subwoofer & Speakers for VW Transporter T6

RRP £1,098.99 £999.99 Save 9% Bundle
In stock
SKU: 90005MPN: SPC-W84AT6-2 - SPC-108T6
Part of the Alpine Subwoofers range · 22 products See the range →

This Alpine kit bundles the SPC-W84AT6-2 6-channel DSP amplifier (PDA-S560), under-seat subwoofer and SPC-108T6 component door speakers for the Volkswagen T6 (California, Multivan, Transporter and Caravelle, 07/2015–10/2019). It is a plug-and-play sound upgrade compatible with the original VW radio.

This listing is for the T6. This kit is also available for the T6.1 as the Alpine SPC-W84AT6-2 6 Channel DSP Amplifier & Subwoofer for VW Transporter T6.1 & T6. The amplifier and subwoofer are also sold separately as the Alpine SPC-W84AT6-2, and the speakers as the Alpine SPC-108T6-2.

Key specifications

  • Vehicles: VW T6 California, Multivan, Transporter and Caravelle (07/2015–10/2019)
  • Amplifier: 6-channel DSP (PDA-S560), 1120 W peak, Class AB (CH 1–4) and Class D (CH 5–6)
  • Amplifier RMS power: 80 W x 4 into 4 ohms (CH 1–4), 120 W x 2 into 2 ohms (CH 5–6)
  • Subwoofer: 20 cm (8") dual voice coil (2 ohm + 2 ohm), 60 W RMS / 180 W peak, sealed wooden enclosure
  • Door speakers: 200 mm mid-range woofers and 28 mm silk-dome tweeters, 100 W RMS / 300 W peak, 4 ohms
  • Inputs: 4 high-power inputs for original VW radios, RCA for aftermarket radios
  • Tuning: pre-programmed VW T6 settings with EQ and digital time correction, LHD/RHD adjustment
  • Amplifier size: 142 x 40 x 122 mm (176 mm with connectors plugged in)

6-channel DSP amplifier, speakers and subwoofer system for Volkswagen T6

For original Volkswagen radios. Model numbers: SPC-W84AT6-2 and SPC-108T6.

The SPC-W84AT6-2 6-channel DSP amplifier and subwoofer system adds power, dynamics and bass to your VW T6. The amplifier is pre-programmed to match the sound characteristics of the T6 cabin and includes a wiring harness for original VW radios or aftermarket radios with RCA pre-amp outputs, enabling fast plug-and-play installation. The 180 W subwoofer comes pre-installed in a sealed wooden enclosure for fitting under the passenger seat, and is compatible with the California's rotary seat.

More power, more dynamics

The 1120 W peak DSP amplifier drives the full speaker system and the 180 W dual-coil subwoofer. Pre-programmed T6 settings can be further adjusted for steering wheel position (left or right hand drive), radio type and other factors.

Your VW T6 never sounded that good

The Alpine SPC-108T6 component speakers handle up to 300 W peak power and cover deep bass through accurate mids to crisp highs.

  • 200 mm mid-range door speaker
  • Includes steel plates for solid door installation
  • High-quality steel basket and rubber surround
  • 38 mm voice coil, large ferrite magnet
  • Plug-and-play installation using original VW cable harness and connectors
  • 28 mm audiophile-grade back-chambered silk-dome tweeters with neodymium magnet
  • Stainless steel photo-etched tweeter grilles and acoustically optimised tweeter installation brackets
  • Integrated speaker network with foil condenser
  • Frequency response: 39 Hz–25 kHz; sensitivity: 87 dB 1W/m

Powerful bass upgrade

The 180 W dual-coil subwoofer is pre-installed in a sealed wooden enclosure and fits under the passenger seat. It is compatible with the California's rotary seats and the Caravelle's 2-person bench (installed under the driver's seat in that configuration).

Fast and easy installation

All installation brackets and cable harnesses are included in the SPC-W84AT6-2 kit. The plug-and-play wiring harness connects to an original VW T6 radio via high-power inputs or to aftermarket radios via RCA pre-amp outputs. You can also add an Alpine RUX-KNOB2 remote bass level control for convenient subwoofer adjustment.

Compatibility

  • Volkswagen T6 California 07/2015–10/2019
  • Volkswagen T6 Multivan 07/2015–10/2019
  • Volkswagen T6 Transporter 07/2015–10/2019
  • Volkswagen T6 Caravelle 07/2015–10/2019

Compatible with rotary seats and 2-person front bench. Wiring harness supports original VW radio systems (high-power input) and aftermarket radios with RCA pre-amp outputs.

Specification
RMS Power Ratings CH 1-4 into 4 Ohms80W RMS x 4 (14.4V at 1% THD+N)
RMS Power Ratings CH 5-6 into 2 Ohms120W RMS x 2 (14.4V at 1% THD+N)
Power Requirement12 V
Measurements142mm x 40mm x 122mm (176mm with connectors plugged in)
Frequency response10 Hz - 22.000 Hz
Measurements355mm x 330mm x 170mm
Sensitivity91dB 1W/W
Peak Power Handling300 Watts
RMS Power Handling100 Watts
Frequency response39Hz – 25kHz
Impedance4 Ohms
Sensitivity87dB 1W/m
More specs
  • 6-Channel DSP Amplifier
  • Class AB (channel 1-4) and Class D (channel 5+6) amplification circuits
  • 4x high power inputs
  • Pre-programmed VW T6 sound settings with EQ and digital time correction
  • Adjustments for LHD or RHD vehicles
  • Designed to work with retrofit radio (RCA)
  • Designed to work with original Volkswagen T6 radios (high-power)
  • 20cm (8”) dual voice coil subwoofer (2 Ohm + 2 Ohm)
  • 180 Watt peak power handling / 60 Watt RMS power handling
  • Includes installation brackets for VW T6 under-seat installation
  • Included subwoofer grill
  • 200 mm mid-range door speaker
  • Includes steel plates for solid door installation
  • High quality steel basket and rubber surround
  • 38 mm voice coil
  • Large Ferrite magnet
  • For easy installation with original VW cable harness (original connectors)
  • 28 mm audiophile-grade back-chambered silk-dome tweeters
  • Neodymium magnet
  • Stainless steel tweeter grills (photo etched)
  • Acoustically optimized tweeter installation brackets
  • Integrate speaker network with foil condenser
  • SPECIFICATIONS
What's Included
  • SPC-W84AT6-2
  • Included subwoofer grill
  • Installation brackets
  • Wiring Kit
  • 6 Channel DSP Amplifier
  • SPC-108T6
  • Includes foam seal ring
  • Includes steel plates for solid door installation
Product information

Alpine

About the Alpine SPC-W84AT6-2 - SPC-108T6

From our tech experts at CEN

A complete system package for the VW Transporter T6: a six-channel DSP amplifier with a matched subwoofer and speakers, built to work with the vehicle’s factory wiring.

Who it suits

VW Transporter T6 owners who want a proper system rather than piecemeal upgrades. The DSP is what makes it work, because a van cabin is an awkward shape and processing corrects for where you actually sit.

Our tech experts advise

The parts are matched, but the result still comes down to the tuning, done in the vehicle once everything is in. We install and tune these at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs and what the work involves. See car audio installation.

Explore the full Alpine range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Alpine

Alpine News & Guides

The latest Alpine product news, launches and guides from the CEN team in Nottingham.

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Which vans does this Alpine T6 kit fit?

A: The Volkswagen T6 California, Multivan, Transporter and Caravelle from 07/2015 to 10/2019, including vans with rotary seats or the 2-person front bench. For the T6.1, choose the T6.1 version of the kit.

Q: Does this kit work with my original VW radio?

A: Yes. The wiring harness connects to original VW radio systems through 4 high-power inputs, and also works with aftermarket radios that have RCA pre-amp outputs.

Q: Is an amplifier included?

A: Yes. The kit includes the SPC-W84AT6-2 6-channel DSP amplifier, which powers the door speakers and the included under-seat subwoofer, so no separate amplifier is needed.

Q: Can CEN install this kit?

A: Yes. CEN offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to book.