












Alpine 6 Channel DSP Amplifier Subwoofer & Speakers for VW Crafter 2 MAN TGE
Couldn't Load Pickup availability
The Alpine SPC-W84ACRA2-2 + SPC-106CRA2 is a 6-channel DSP amplifier, under-seat subwoofer and door speaker bundle for the Volkswagen Crafter 2, Grand California and MAN TGE (2017 onwards). It delivers 1120W peak power through the PDA-S560 amplifier and is part of Alpine's Concert Ensemble vehicle-specific sound system range.
This listing is for the VW Crafter 2 / MAN TGE version. The Alpine 6-channel DSP amplifier, subwoofer and speaker system is also available for the VW Transporter T6.1.
Key specifications
- Amplifier: PDA-S560 6-channel DSP, Class AB (channels 1–4) and Class D (channels 5–6)
- Amplifier power: 80W RMS x 4 (4 ohms) + 120W RMS x 2 (2 ohms), 1120W peak
- Subwoofer: 20cm (8-inch) dual voice coil (2 + 2 ohms) in a sealed wooden enclosure
- Subwoofer power: 60W RMS, 180W peak; frequency response 34Hz – 1.5kHz
- Door speakers: 166mm woofers with 28mm silk-dome tweeters, 60W RMS, 180W peak, 4 ohms
- Inputs: original Volkswagen radio (high-power) or aftermarket radio with RCA pre-amp outputs
- Fits: VW Crafter 2 Panel Van, Minibus and Grand California, and MAN TGE, 2017 onwards
6-channel DSP amplifier, subwoofer system and speakers SPC-W84ACRA2-2 + SPC-106CRA2
For Volkswagen Crafter 2 / Grand California and MAN TGE
This kit upgrades your Alpine Adventure Audio speaker system in the VW Crafter 2, Grand California or MAN TGE to the Concert Ensemble level. The SPC-W84ACRA2-2 pairs the PDA-S560 6-channel DSP amplifier with an under-seat subwoofer, and the SPC-106CRA2 door speakers complete the package.
The DSP amplifier is pre-programmed to match the acoustic characteristics of the Crafter 2 and Grand California cabin. The included wiring harness supports original Volkswagen radios or aftermarket radios with RCA pre-amp outputs for a fast plug-and-play installation.
The 180W subwoofer comes pre-installed in a custom-fit sealed wooden enclosure designed to sit under the passenger seat. It is compatible with the rotary seat found in the Grand California camping van.
Your VW Crafter 2 never sounded this good
The Alpine SPC-106CRA2 door speakers deliver deep bass, accurate mids and crisp highs, handling up to 180W peak power. Combined with the DSP amplifier, the full system brings a clear, high-fidelity listening experience to your van at an accessible price.
Upgrade to Concert Ensemble
If you already have an Alpine Adventure Audio speaker system fitted in your Crafter 2 or Grand California, the SPC-W84ACRA2-2 takes it further — adding power, dynamics, bass and better staging through digital time correction.
Compatible vehicles
- Volkswagen Crafter 2 Panel Van, 2017 onwards
- Volkswagen Crafter 2 Minibus, 2017 onwards
- Volkswagen Crafter 2 Grand California, 2017 onwards
- MAN TGE, 2017 onwards
More power, more dynamics
The PDA-S560 DSP amplifier delivers 1120W peak power across the full system, including the 180W dual voice coil subwoofer. As well as its factory programming for the Crafter 2 cabin, it can be further adjusted for steering wheel configuration (left or right), radio type and other factors.
Powerful bass upgrade
The 180W dual voice coil subwoofer is pre-installed in a sealed wooden enclosure and mounts under the passenger seat. It is compatible with the rotary seat option on Grand California models.
Fast and easy installation
The SPC-W84ACRA2-2 kit includes all required mounting brackets and cable harnesses. The plug-and-play wiring harness connects to the original VW Crafter 2, Grand California or MAN TGE radio, or to an aftermarket radio with RCA pre-amp outputs.
Explore the full range in Alpine Cameras & Accessories.
Specification
| RMS Power Ratings CH 1-4 into 4 Ohms | 80W RMS x 4 (14.4V at 1% THD+N) |
|---|---|
| RMS Power Ratings CH 5-6 into 2 Ohms | 120W RMS x 2 (14.4V at 1% THD+N) |
| Power Requirement | 12 V |
| Measurements | 142mm x 40mm x 122mm (176mm with connectors plugged in) |
| Frequency response | 34Hz – 1.5kHz |
| Measurements | 315mm x 320mm x 170mm |
| Sensitivity | 91dB/W (1m) |
| Peak Power | 180 Watts |
| RMS Power | 60 Watts |
| Frequency response | 45Hz – 25kHz |
| Impedance | 4 Ohms |
| Sensitivity | 89dB 1W/1m |
More specs
| |
What's Included
- SPC-W84ACRA2-2
- SPC-106CRA2 Speakers
- Included subwoofer grill
- Installation brackets
- Wiring Kit
- 6 Channel DSP Amplifier
Alpine
About the Alpine SPC-W84ACRA2-2 + SPC-106CRA2
From our tech experts at CEN
A complete system package for the VW Crafter and MAN TGE: a six-channel DSP amplifier with a matched subwoofer and speakers, built to work with the vehicle’s factory wiring.
Who it suits
VW Crafter and MAN TGE owners who want a proper system rather than piecemeal upgrades. The DSP is what makes it work, because a van cabin is an awkward shape and processing corrects for where you actually sit.
Our tech experts advise
The parts are matched, but the result still comes down to the tuning, done in the vehicle once everything is in. We install and tune these at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs and what the work involves. See car audio installation.
Explore the full Alpine range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Alpine
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Alpine News & Guides
The latest Alpine product news, launches and guides from the CEN team in Nottingham.
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
The Alpine iLX-F905D Halo9 solves the biggest problem in car stereo upgrades: wanting a big screen in a car with...
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Frequently Asked Questions
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: Do I need a separate amplifier for this Alpine kit?
A: No. The kit includes the PDA-S560 6-channel DSP amplifier, which powers the door speakers and drives the included 8-inch dual voice coil subwoofer.
Q: Which vehicles does this Alpine kit fit?
A: It is designed for the Volkswagen Crafter 2 Panel Van, Minibus and Grand California, and the MAN TGE, all from 2017 onwards. The subwoofer mounts under the passenger seat and is compatible with the Grand California rotary seat.
Q: Does it work with the original Volkswagen radio?
A: Yes. The plug-and-play wiring harness connects to an original Volkswagen Crafter 2 / Grand California / MAN TGE radio via high-power inputs, or to an aftermarket radio with RCA pre-amp outputs.
Q: What is included in this kit?
A: The SPC-W84ACRA2-2 6-channel DSP amplifier and subwoofer system, SPC-106CRA2 speakers, subwoofer grille, installation brackets and wiring kit.







































