


Morel MPD 1.500 Mono Compact Subwoofer Amplifier 350w RMS
Couldn't Load Pickup availability
The Morel MPD 1.500 is a compact mono subwoofer amplifier from Morel's MPD series, delivering 350W x 1 at 4 ohms and 550W x 1 at 2 ohms.
Bass level can be adjusted from the driver's seat with the optional Morel MPS-R1 remote.
Key specifications
- Channels: 1 (mono)
- Power at 4 ohms: 350W x 1
- Power at 2 ohms: 550W x 1
- THD+N: below 0.3%
- Frequency response: 10 to 220Hz
- Filters: low-pass 40 to 220Hz, subsonic off to 50Hz, 12dB/octave
- Inputs: pre-amp 0.35 to 3.5V, speaker-level 0.7 to 7V
- Remote level control: optional MPS-R1
- Fuse: 60A
- Dimensions: 48 x 148 x 181.5mm
Morel MPD 1.500
The MPD 1.500 is built specifically for subwoofer duty. It puts out 350W x 1 at 4 ohms and 550W x 1 at 2 ohms, with variable low-pass (40–220Hz) and subsonic (off to 50Hz) crossovers at 12dB/octave. THD+N is kept below 0.3%, and a built-in protection circuit adds long-term reliability. At 48 x 148 x 181.5mm, it's compact enough to tuck away almost anywhere in the vehicle.
If you're building a full system, Morel also offer the Morel MPS 4.400 four-channel amplifier for powering door speakers alongside this mono sub amp.
Explore the full range in 1 Channel Amplifier.
Specification
| 4Ω stereo | 350w x 1 |
|---|---|
| 2Ω stereo | 550w x 1 |
| 4Ω Mono/Bridged | N/A |
| Minimum Impedance | 2Ω |
| THD+N | <0.3% |
| Frequency Response | (+/-1dB) 10-220Hz |
| S/N Ratio (Rated Power, A-weighted) | >98dB |
| Channel Separation | N/A |
| Input Voltage Range | 0.35-3.5V (PRE INPUT) 0.7-7V (SPK INPUT) |
| Filters | LPF 40~220HzSubsonic OFF~50Hz |
| Crossover slope | 12dB/Octave |
| Remote Level Control | Optional MPS-R1 |
| Fuse recommendation | 60A |
| Dimensions | (HxWxL) 1.9" (48mm) x 5.8" (148mm) x 7.2" (181.5mm) |
What's Included
- Morel MPD 1.500
Morel
About the Morel MPD 1.500
From our tech experts at CEN
A multi-channel amplifier, rated at 350w RMS.
Who it suits
Drivers who have upgraded their speakers and found the head unit cannot drive them properly.
Our tech experts advise
Matching matters more than headline watts, and the gains want setting with a meter rather than by ear. It also needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Frequently Asked Questions
Q: Is there a bass remote for the Morel MPD 1.500?
A: Yes. The optional Morel MPS-R1 remote level control is compatible with the MPD 1.500.
Q: What is the minimum impedance of the MPD 1.500?
A: The minimum impedance is 2 ohms, where it delivers 550W x 1.
Q: Can the MPD 1.500 take a speaker-level input?
A: Yes. It accepts pre-amp inputs of 0.35 to 3.5V and speaker-level inputs of 0.7 to 7V.












































