




Couldn't Load Pickup availability
The Kicker 48CWRT674 is a 6.75″ shallow-mount subwoofer from the CompRT range, rated at 150W RMS (300W peak) with dual 4 ohm voice coils and a mounting depth of just 7 cm.
This listing is the dual 4 ohm version. The CompRT 6.75″ is also available in dual 2 ohm (48CWRT672).
Key specifications
- Size: 6.75″
- Voice coils: Dual 4 ohm
- RMS power: 150W
- Peak power: 300W
- Sensitivity: 82.57 dB (1W/1m)
- Mounting depth: 7 cm (2 3/4″)
- Mounting diameter: 14.3 cm (5 5/8″)
- Sealed box volume: 5.1 to 21.24 litres (0.18 to 0.75 cu ft)
CompRT 6.75″ Thin Profile Dual Voice Coil Subwoofer – 4 Ohm (48CWRT674)
The CompRT range of ultra-thin subwoofers is designed to fit under a seat or behind a rear bench. The updated CompRT features a blacked-out cone and improved efficiency, delivering strong bass in minimal space.
This 6.75″ subwoofer is an all-weather thin sub with dual 4 ohm voice coils. With a mounting depth of under three inches and 150W RMS power handling, it suits a wide range of installation locations.
An advanced suspension and heat management system keeps bass powerful, deep and consistent. Kicker's Forced-Air Cooling™ technology helps the driver run up to 20% cooler. Signature red double stitching bonds the Santoprene surround to the polypropylene cone. SoloKon™ technology joins the cone to the vented back brace, forming a single integrated unit that cools the motor and reduces distortion.
Features
- Shallow mounting depth
- Small enclosure requirements
- Forced-Air Cooling™
- Signature double red stitching
- Push terminals
The 48CWRT674 works best in a sealed enclosure with 150W of recommended power.
Explore the full range in Kicker CompR, CompRT & CompC Subwoofers.
Specification
| Impedance | (Ohms) Dual 4 |
|---|---|
| Voice Coils | Dual |
| RMS Power (W) | 150 |
| Peak Power (W) | 300 |
| Sensitivity | (dB @ 1W/1m) 82.57 |
| Frequency Response | (Hz) 54.5 |
| Mounting Depth | 2 3/4" (7 cm) |
| Mounting Diameter | 5 5/8" (14.3 cm) |
| Min Sealed Box Vol | 0.18 cu ft (5.1 L) |
| Max Sealed Box Vol | 0.75 cu ft (21.24 L) |
What's Included
- Kicker 48CWRT674 Subwoofer
Kicker
About the Kicker 48CWRT674
From our tech experts at CEN
A 6.75 inch subwoofer from the Comp line, Kicker’s long-running range for solid bass without a competition budget, with a 4 ohm voice coil so it can be wired to suit your amplifier.
Who it suits
Drivers building a system where the bass does real work rather than filling in behind the speakers. It needs an enclosure sized correctly for the driver: sealed for tight and accurate, ported for louder and deeper.
Our tech experts advise
A subwoofer is only as good as its enclosure and the amplifier behind it. Box volume, port tuning and how the voice coils are wired decide what you actually hear. We build enclosures to suit the vehicle and match amplification at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: How shallow is the Kicker 48CWRT674?
A: The 48CWRT674 has a mounting depth of 7 cm (2 3/4") and a mounting diameter of 14.3 cm (5 5/8").
Q: What size box does the 48CWRT674 need?
A: Kicker recommends a sealed enclosure of 0.18 to 0.75 cu ft (5.1 to 21.24 litres). The 6.75 inch CompRT is designed for sealed enclosures.
Q: How can the dual 4 ohm voice coils be wired?
A: The two 4 ohm voice coils can be wired in parallel for a 2 ohm load or in series for an 8 ohm load. Choose the wiring that matches the impedance your amplifier is rated for.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →




































