






JL Audio MBT-CRXv3 Car & Marine Wireless Bluetooth Audio Receiver Controller
Couldn't Load Pickup availability
The JL Audio MBT-CRXv3 is an IP67 water-resistant Bluetooth 5.0 audio receiver and controller with Qualcomm aptX HD, designed for marine, motorsport and outdoor use. It works as a stand-alone wireless source unit or as an add-on Bluetooth controller for an existing system.
Key specifications
- Bluetooth: version 5.0, A2DP, Qualcomm aptX HD
- Range: up to 11 m (35 ft), line of sight
- Water resistance: IP67
- Outputs: stereo preamp outputs for two zones plus a subwoofer output, 4V RMS
- Frequency response: 20 Hz - 20 kHz (±1 dB)
- S/N ratio: 101 dB
- Remote turn-on output: +12V, 350 mA max
- Operating voltage: 8 - 16V DC
- Size: 55 mm W x 55 mm H x 19 mm D, 60 mm mounting depth
- Mounting hole: 29 mm minimum (rear access), up to 48 mm front mount with plate
MBT-CRXv3 water-resistant audio controller and receiver with Bluetooth wireless technology
Engineered for marine, motorsport and outdoor applications, the MBT-CRXv3 is built to deliver high-quality streaming audio to almost any sound system over land or water.
Housed in a compact IP67-rated chassis, it suits small watercraft, motorcycles, golf carts and utility vehicles. Installation requires just a single mounting hole. It can function as a stand-alone wireless audio source unit or as an add-on wireless audio controller and receiver. Large backlit controls allow easy operation day or night, and an adaptor plate is included for front-mount applications or where rear access is limited.
Bluetooth 5.0 with Qualcomm aptX HD delivers dynamic, CD-like sound from a compatible streaming device up to 35 ft (11 m) away. Two sets of stereo preamp outputs (4V RMS) feed two independent audio zones, with a dedicated subwoofer output alongside. Independent zone level controls with LED colour indicators give straightforward command of the system while your streaming device is stowed away. A +12V remote turn-on output (350 mA max) handles amplifier switching. If you are looking for a simpler Bluetooth receiver without zone control, JL Audio also offer the MBT-RXv2.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JL Audio is under licence. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. Use of such marks by JL Audio is under licence.
Explore the full range in Bluetooth Receivers.
Specification
| Frequency Response | 20 Hz - 20 kHz (±1dB) |
|---|---|
| Mounting Depth | (A) 2.36 in / 60 mm |
More specs
| |
What's Included
- MBT-CRXv3
JL Audio
About the JL Audio MBT-CRXv3
From our tech experts at CEN
A wireless Bluetooth receiver that feeds a JL Audio amplifier directly, rated for car and marine use.
Who it suits
Anyone who wants to stream to an amplified system without routing audio through a weak factory head unit, and marine builds where there may be no head unit at all.
Our tech experts advise
Where it sits in the signal chain decides what you hear. Confirm compatibility with your amplifier before ordering — get in touch. See car audio installation.
Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Frequently Asked Questions
Q: Is the JL Audio MBT-CRXv3 waterproof?
A: It is housed in a compact, water-resistant chassis rated IP67, and is designed for marine, motorsport and outdoor use.
Q: Can the MBT-CRXv3 be used without a head unit?
A: Yes. It can work as a stand-alone wireless audio source unit, or as an add-on wireless controller and receiver for an existing system. It has two zones of stereo preamp outputs plus a subwoofer output to feed amplifiers.
Q: What size hole does the MBT-CRXv3 need?
A: It needs a single hole: 29 mm minimum with access to the rear of the panel, or up to 48 mm when front mounting with the included adaptor plate. Mounting depth is 60 mm.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Outdoor
How to Choose a Jump Starter: NOCO GB40 vs GBX45 vs GBX75 and More
Read the guide →
Outdoor
New at CEN: Chipolo Trackers — Find Your Keys, Wallet and Everything Else
Read more →
Outdoor
Power Cuts and Winter Storms: Home Backup Power Explained
Read the guide →
Outdoor
GTA 6 Launches Thursday - Don't Let a Power Cut Catch You Out
Read the guide →
outdoor
Jackery vs Bluetti vs Anker SOLIX vs EcoFlow: Which Power Station? (2026)
Read more →
Outdoor
New at CEN: The Jackery Explorer v2 Range, From 99Wh to 3kWh
Read more →


























