Shop All

JL Audio 6W3V3-4 6.5" 16.5cm W3 Series Car Sub Subwoofer Driver 4ohm 150w RMS

RRP £279.00 £255.00 Save 9% Out of stock
Black Friday
Out of Stock
SKU: 90942MPN: 6W3v3-4
Part of the range · 60 productsPart of the JL Audio Subwoofers range · 60 products See the range →

The JL Audio 6W3v3-4 is a 6.5" (165 mm) W3 Series car subwoofer driver with a single 4 ohm voice coil and 150W RMS power handling, designed for use in extremely small enclosures.

This listing is the 6.5" 6W3v3-4. The W3v3 range is also available in 8" (8W3v3-4, 250W RMS).

Key specifications

  • Size: 6.5 in / 165 mm
  • Power handling: 150W RMS
  • Recommended amplifier power: 50–150W RMS
  • Impedance: 4 ohm (single voice coil)
  • Recommended sealed enclosure: 0.15 cu ft (4.2 litres)
  • Recommended ported enclosure: 0.25 cu ft (7.1 litres)
  • Mounting depth: 4.25 in / 108 mm
  • Mounting hole diameter: 5.5 in / 140 mm
  • Linear excursion (Xmax, one way): 0.35 in / 8.89 mm

6W3v3-4: 6.5-inch (165 mm) Subwoofer Driver, 4 Ω

The 6W3v3-4 is a true subwoofer built for extremely small enclosures. It uses the same technologies as JL Audio's larger W3v3 drivers to deliver 0.35 in (8.9 mm) of one-way linear excursion. It works best with 50–150W RMS of amplifier power and is optimised for a 0.15 cu ft (4.2 l) sealed enclosure or a 0.25 cu ft (7.1 l) ported enclosure.

Dynamic Motor Analysis — DMA Optimised Motor

JL Audio's Dynamic Motor Analysis (DMA) system is an FEA-based modelling suite first developed in 1997 and continuously refined to address speaker motor linearity. The result is reduced distortion, accurate transient reproduction, and tight, clean bass.

Elevated Frame Cooling

JL Audio's patented Elevated Frame Cooling design channels cool air through slots directly above the top-plate to the voice coil. This improves power handling and reduces dynamic parameter shifts and power compression.

Floating Cone Attach Method — FCAM™

JL Audio's FCAM assembly technique ensures correct surround geometry in the finished speaker, improving excursion control and dynamic voice coil alignment.

Vented Reinforcement Collar

The Vented Reinforcement Collar (VRC®) improves rigidity and stability at the cone/spider/voice coil junction and directs airflow over the voice coil windings for better thermal performance.

Specification
Mounting Depth(E)    4.25 in / 108 mm
More specs
  • Continuous Power Handling (RMS)    150 W
  • Recommended Amplifier Power (RMS)    50 - 150 W
  • Nominal Impedance (Znom)    4 Ω
  • Nominal Diameter    6.5 in / 165 mm
  • Overall Diameter (A)    6.85 in / 174 mm
  • Mounting Hole Diameter (B)    5.5 in / 140 mm
  • Bolt Hole Circle Diameter (C)    6.125 in / 156 mm
  • Motor Outer Diameter (D)    4.25 in / 108 mm
  • Driver Displacement    0.02 cu ft / 0.57 L
  • Net Weight    6.1 lb / 2.8 kg
  • Free Air Resonance (Fs)    41.80 Hz
  • Electrical “Q” (Qes)    0.533
  • Mechanical “Q” (Qms)    11.027
  • Total Speaker “Q” (Qts)    0.508
  • Equivalent Compliance (Vas)    0.181 cu ft / 5.13 L
  • One-Way Linear Excursion (Xmax)*    0.35 in / 8.89 mm
  • Reference Efficiency (no)    0.07%
  • Efficiency (1 W / 1 m)**    80.49 dB SPL
  • Effective Piston Area (Sd)    17.36 sq in / 0.0112 sq m
  • DC Resistance (Re)    3.476 Ω
What's Included
  • 6W3v3-4
  • Black plastic trim ring
  • Owner's Manual
Product information

JL Audio

About the JL Audio 6W3v3-4

From our tech experts at CEN

A JL Audio 6.5 inch W3 Series subwoofer driver, 4 ohm, handling 150w RMS.

Who it suits

Drivers building a system around a properly specified enclosure rather than a box off the shelf. W3 is the sweet spot of the range for most cars, and what we fit most often.

Our tech experts advise

This is a driver, not a finished system: enclosure volume and tuning decide most of what you hear, and JL publish specifications worth building to, and the 4 ohm coil decides how it should be wired to your amplifier. We build enclosures to suit both driver and vehicle at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Q: What amplifier power does the JL Audio 6W3v3-4 need?

A: JL Audio recommends 50 - 150W RMS of amplifier power for the 6W3v3-4. It is rated at 150W RMS continuous power handling (4 ohm impedance).

Q: What box size is recommended for the 6W3v3-4?

A: The 6W3v3-4 is optimised for a 0.15 cu ft (4.2 litres) sealed enclosure or a 0.25 cu ft (7.1 litres) ported enclosure. Full enclosure details are in the Specification tab.

Q: How deep is the 6W3v3-4 and what cut-out does it need?

A: The 6W3v3-4 has a mounting depth of 4.25 in / 108 mm and needs a mounting hole (cut-out) diameter of 5.5 in / 140 mm.

Q: Is the 6W3v3-4 a subwoofer or a midbass speaker?

A: It is a true subwoofer. It uses the same technologies as the larger W3v3 subwoofers and is designed to run in a tiny sealed or ported enclosure.