Shop All

ESX QXF6.2C Component Speakers and Tweeters for Fiat Ducato Peugeot Boxer

RRP £249.99 £219.99 Save 12% Out of stock
Out of Stock
SKU: 90437MPN: QXF6.2C

The ESX Quantum QXF6.2C is a plug-and-play 16 cm (6") 2-way component speaker system for the Fiat Ducato platform, including the Peugeot Boxer and Citroën Jumper. Rated at 90W RMS (180W max) at 3 ohms, it fits original door openings without adapter rings. It is part of ESX's Quantum range.

Key specifications

  • Type: 16 cm (6") 2-way component system
  • Power handling: 90W RMS, 180W max
  • Impedance: 3 ohm
  • Sensitivity: 93 dB
  • Frequency range: 50 Hz to 24 kHz
  • Tweeters: 25 mm neodymium, aluminium dome
  • Crossover: 6 dB cable crossover, 3800 Hz
  • Installation: 155 mm diameter, 51 mm depth
  • Connection: plug-and-play connectors

QXF6.2C 16 cm (6") 2-way component system

The Quantum QXF6.2C is a straightforward sound upgrade for the Fiat Ducato platform, installed via plug-and-play connectors with no additional adapter rings required. The lightweight bass-midrange speakers use an ABS basket and drop directly into the original door openings, delivering powerful bass down to 50 Hz. An integrated socket at the top of the basket connects to the vehicle's original speaker cables.

With 93 dB sensitivity and a 3 ohm load impedance, the system works well with most head units and amplifiers. The 25 mm neodymium aluminium-dome tweeters extend sound reproduction up to 24,000 Hz. The 6 dB cable crossover is built into the tweeter connection cable, providing a clean separation at 3800 Hz. If you drive a Ford Transit, the ESX QXT6.2C is the equivalent fitment for that vehicle.

Compatibility

  • Fiat Ducato F8 (2021+)
  • Fiat Ducato III (Type 250, 2006+), Ducato IV (Type 290, 2015+)
  • Citroën Jumper II (Type 250, 2006+), Jumper III (Type 290, 2015+)
  • Peugeot Boxer II (Type 250, 2006+), Boxer III (Type 290, 2015+)
  • Opel Movano III (10/2021+)
  • Ford Ka II (2009–2016)
Specification
Size6 Inch
RMS Power90w
ShapeRound
TypeComponent
SeriesQXF
Article NumberQXF6.2C
Country of ManufactureChina
More specs
  • 16 cm (6") 2-Way Component System
  • 90 Watts/RMS, 180 Watts/Max., Impedance 3 Ω
  • Frequency Range 50 - 24000 Hz
  • 160 mm Midbass Speakers with fiber-reinforced Cone
  • 25 mm Aluminum Tweeters
  • 6dB Cable Crossovers
  • Installation diameter 155 mm, Installation depth 51 mm
  • Plug+Play Connectors
  • Fiat Ducato F8 (2021+)
  • Fiat Ducato III (Type 250, 2006+), Ducato IV (Type 290, 2015+)
  • Citroën Jumper II (Type 250, 2006+), Jumper III (Type 290, 2015+)
  • Peugeot Boxer II (Type 250, 2006+), Boxer III (Type 290, 2015+)
  • Opel Movano III (10/2021+)
  • Ford Ka II ( 2009-2016)
What's Included
  • 2x QXF6.2C Speakers
  • 2x Tweeters
Product information

ESX

About the ESX QXF6.2C

From our tech experts at CEN

ESX component speakers, with separate tweeters for mounting where you will actually hear them.

Who it suits

Drivers building a proper front stage and happy for tweeters to be mounted separately, which usually means a professional fit. ESX builds accessible, vehicle-specific upgrades.

Our tech experts advise

Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering rather than guessing. Door treatment matters as much as the speaker. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full ESX range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all ESX

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: Which vans does the ESX QXF6.2C fit?

A: It is designed for the Fiat Ducato platform: Fiat Ducato III, IV and F8, Citroën Jumper II and III, Peugeot Boxer II and III and Opel Movano III (10/2021 on). ESX also lists the Ford Ka II (2009-2016).

Q: Do I need adapter rings or to cut wiring to fit the QXF6.2C?

A: No. The woofers fit the original openings without adapter rings and have an integrated socket for the original speaker plugs, so installation is plug and play.

Q: What is included with the QXF6.2C?

A: Two QXF6.2C bass-midrange speakers and two tweeters, with the 6 dB crossover built into the tweeter cables.