Shop All

JL Audio C3-100CT 1" 25mm Car Component Tweeters & Crossovers Pair 75w RMS

RRP £169.00 £154.00 Save 9%
In stock
SKU: 90973MPN: C3-100CT

C3-100ct

A pair of 1-inch (25 mm) silk dome component tweeters from JL Audio's C3 range, supplied with inline crossovers for straightforward installation.

1-inch (25 mm) Silk Dome Tweeters

Silk dome tweeters are favoured by audiophiles for accurate, non-fatiguing high-frequency sound. The C3-100CT uses 1-inch silk dome diaphragms to deliver powerful, extended response both on and off axis.

Flush-mount and surface-mount fixtures are included to suit a wide range of installation positions. They can also be fitted coaxially onto C3 woofers using the fixtures supplied with C3 Component / Coaxial Systems.

Inline 12 dB/octave high-pass filters with tweeter protectors are included. These tweeters are designed to operate above 4 kHz with a minimum high-pass slope of 12 dB/octave.

  • Sonic character: Clean and Powerful
  • Sold as a pair
Specification
Size1 Inch
RMS Power75W
ShapeRound
TypeComponent
SeriesC3
Article NumberC3-100CT
Country of ManufactureChina
More specs
  • Continuous Power Handling (RMS)    75 W
  • Peak Music Power*    225 W
  • Recommended Amplifier Power (RMS)    25 - 150 W / Ch.
  • System Efficiency    90.0 dB @ 1 W / 1 m
  • System Nominal Impedance    4 Ω
  • System Frequency Response    4 kHz - 25 KHz ± 3 dB
  • Flush Mount Fixture Diameter (A1)    2.12 in / 54 mm
  • Surface Mount Fixture Diameter (A2)    1.93 in / 49 mm
  • Flush Mount Mounting Hole Diameter (B)    1.875 in / 48 mm
  • Flush Mount Mounting Depth (C)    0.71 in / 18.0 mm
  • Flush Mount Tweeter Frontal Protrusion (D1)    0.32 in / 8 mm
  • Surface Mount Tweeter Frontal Protrusion (D2)    0.95 in / 24 mm
What's Included
  • C3-100ct
Product information

JL Audio

About the JL Audio C3-100CT

From our tech experts at CEN

JL Audio C3 Series tweeters, 1 inch, supplied with crossovers and rated at 75w RMS.

Who it suits

Drivers building or repairing a front stage where the tweeter needs to sit higher than the door, on the pillar or in the dash.

Our tech experts advise

Placement and aiming change the result more than the tweeter does, and the supplied crossover exists so the tweeter is never asked to play too low. get in touch if you are unsure how these would integrate. See car audio installation.

Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.