Wavtech 10 Inch Professional Series Shallow Subwoofer ThinPro10 Sub 2 Ohm
Couldn't Load Pickup availability
The Wavtech ThinPRO10 is a 10-inch Professional Series shallow-mount subwoofer with a single 2 Ohm voice coil, handling 750W RMS from a mounting depth of just 2.9 inches (74mm).
This listing is the 2 Ohm version. The ThinPRO10 is also available in a 4 Ohm version to suit different amplifier loads. The Professional Series shallow subwoofer range is also available as the ThinPRO12 in 12 inch.
Key specifications
- Size: 10 inch
- Impedance: Single voice coil, 2 Ohm
- Power: 750W RMS / 2250W peak
- Mounting depth: 2.9" (74mm)
- Cut-out diameter: 23cm
- Linear xmax: 20mm
- Voice coil: 4.5" with 4-layer winding
- Sealed box: 0.25–0.8 cu ft (optimum 0.35 cu ft)
- Ported box: 0.8–1.5 cu ft (optimum 1.0 cu ft)
ThinPRO10 2 Ohm 10" Professional Series shallow subwoofer
The ThinPRO10 is a shallow-mount subwoofer with a 2.9" mounting depth, designed to fit tight spaces without sacrificing performance.
Dual mirrored NBR spiders and an axial force transfer assembly deliver 20mm of linear xmax. The FEA-optimised dual-gap motor structure, powered by double-stacked strontium magnets, maximises control and output for deep, powerful bass.
The ThinPRO10 uses a composite Nomex® and glass fibre honeycomb cone — rigid yet lightweight — paired with a 4.5" voice coil for 750W RMS power handling in a compact form factor.
Enclosure requirements:
- Sealed: 0.25–0.8 cu ft (optimum 0.35 cu ft)
- Ported: 0.8–1.5 cu ft (optimum 1.0 cu ft)
Key features
- 750W RMS power handling
- Single voice coil — 2 Ohm
- 2.9" ultra-slim mounting depth
- 4.5" voice coil with 4-layer winding
- Honeycomb Nomex® and glass fibre cone
- FEA-optimised dual-gap motor for maximum output
- Double-roll NBR surround for smooth, deep bass
- 8AWG push terminals for secure connections
- Vented cast aluminium frame for heat dissipation
- Protective grille included
Explore the full range in Wavtech.
Specification
| Impedance | (Ohms) 2 |
|---|---|
| Frequency Response | (Hz) N/A |
| Mounting Depth | (cm) 7.4 |
More specs
| |
What's Included
- ThinPRO10 2 Ohm
Wavtech
About the Wavtech thinPRO10 2ohm
From our tech experts at CEN
A Wavtech 10 inch subwoofer, 2 ohm.
Who it suits
Drivers building a system where the bass does real work rather than filling in behind the speakers.
Our tech experts advise
Enclosure volume and tuning decide most of what you hear. We build enclosures to suit both driver and vehicle at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Wavtech range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Wavtech
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Wavtech
More options from the same range, in stock and ready to go
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: How deep is the Wavtech ThinPRO10?
A: The ThinPRO10 has a mounting depth of 2.9 inches (7.4cm), so it suits shallow enclosures under seats, behind seats and in tight boot spaces.
Q: What box size does the ThinPRO10 need?
A: Sealed boxes of 0.25 to 0.8 cu ft (optimum 0.35 cu ft) or ported boxes of 0.8 to 1.5 cu ft (optimum 1.0 cu ft).
Q: Is a grille included with the ThinPRO10?
A: Yes, a protective grille is included.
