



Pioneer GM-A6704 4 Channel Bridgeable Car Audio Speaker Sub Amplifier 380w RMS
Couldn't Load Pickup availability
The Pioneer GM-A6704 is a 4-channel bridgeable car amplifier delivering 380 W RMS (4 x 95 W at 2 ohms), from Pioneer's GM-A series. It suits systems running door speakers, a subwoofer, or both from a single amp.
Key specifications
- Channels: 4, bridgeable
- Continuous power: 4 x 60 W (4 Ω), 4 x 95 W (2 Ω), 2 x 190 W (4 Ω bridged)
- Maximum power: 1000 W (bridged)
- Frequency response: 10 Hz to 70 kHz
- S/N ratio: above 95 dB
- Filters: variable LPF and HPF, 40 to 500 Hz, -12 dB/oct
- Bass boost: 0 to 12 dB at 50 Hz
- Speaker input level: 3 to 26 V
- Chassis size: 356 x 60 x 215 mm
Amplify your audio experience
The bridgeable channels let you configure the GM-A6704 to suit your system, with clean, low-distortion power and thermal management designed to keep it running hard. If you also need a dedicated subwoofer channel, the Pioneer GM-D8701 mono amplifier pairs well alongside it.
- 4 channels deliver powerful, clear, low-distortion audio
- Variable HPF: adjust the high-pass filter frequency for greater system flexibility
- Variable LPF: adjust the low-pass filter frequency for greater system flexibility
Explore the full range in Pioneer Amplifiers & Accessories.
Specification
| Frequency response | 10Hz ~ 70kHz (+0dB , -3dB) |
|---|---|
More specs
| |
What's Included
- Pioneer GM-A6704
- Manual
Pioneer
About the Pioneer GM-A6704
From our tech experts at CEN
A 4-channel amplifier, rated at 380w RMS. Enough channels for a front and rear stage, or a front stage with the rest bridged onto a sub.
Who it suits
Drivers who have upgraded their speakers and found the head unit cannot drive them properly.
Our tech experts advise
Power figures mean little until the amplifier is matched to the speakers and the gains are set with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Pioneer range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Pioneer
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How much power does the Pioneer GM-A6704 produce?
A: It delivers 4 x 60 W RMS at 4 ohms, 4 x 95 W RMS at 2 ohms, or 2 x 190 W RMS bridged at 4 ohms, with a maximum power rating of 1000 W.
Q: Can the GM-A6704 run a subwoofer?
A: Yes. Two channels can be bridged to 190 W RMS at 4 ohms for a subwoofer, and the variable low-pass filter (40 to 500 Hz) and 0 to 12 dB bass boost at 50 Hz help set it up.
Q: Does the GM-A6704 accept speaker-level inputs?
A: Yes. Its speaker input accepts 3 to 26 V, so it can be fed from a factory head unit as well as from RCA pre-outs.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →































