





NOCO GC014 X-Connect XL Battery Clamps M10 Eyelets for Genius 1 2 5 10 G Series
Couldn't Load Pickup availability
The NOCO GC014 X-Connect XL Battery Clamps are a replacement or additional clamp set for NOCO Genius and G Series chargers, featuring removable M10 eyelets for permanent battery mounting. Part of NOCO's X-Connect accessory range.
This listing is for the GC014 XL clamps with M10 eyelets. For smaller battery terminals, the X-Connect range also includes the GC001 X-Connect Micro Battery Clamps with M6 eyelets.
Key specifications
- Compatible with: GENIUS1, GENIUS2, GENIUS5, GENIUS10, GENIUS2x2, GENIUS2x4 and G750, G1100, G3500, G4, G7200 (all versions)
- Not compatible with: NOCO Boost UltraSafe lithium jump starters
- Input: X-Connect female
- Output: battery clamps with removable M10 eyelets
- Fuse: 20 A mini blade
- Wire size: 14 AWG
- Overall length: 25 in (63.5 cm); cable length 21 in (53.3 cm)
Made for Genius Chargers
The GC014 clamps work as a direct replacement or as an additional set for use with a second vehicle. Compatible with a wide range of NOCO Genius and G Series chargers via the X-Connect plug-and-play system.
Compatible With
- G750 (All Versions)
- G1100 (All Versions)
- G3500 (All Versions)
- G4 (All Versions)
- G7200 (All Versions)
- GENIUS1
- GENIUS2
- GENIUS2x2
- GENIUS2x4
- GENIUS5
- GENIUS10
- Not compatible with NOCO Boost UltraSafe Lithium Jump Starters.
X-Connect XL Battery Clamps
Connect your charger quickly to any battery. Remove the M10 eyelets from the clamps and mount them directly to the battery terminals for a permanent, plug-in access point. Handy as a replacement for a lost connector or as a second set for another vehicle.
Explore the full range in NOCO Genius Accessories.
Specification
| Type | Wiring |
|---|---|
| Series | Genius |
| Article Number | GC014 |
| Country of Manufacture | China |
More specs
| |
What's Included
- NOCO GC014 POS / NEG M10 10mm Eyelets to X-Connect Cable
- Battery Clamps
- Hex Wrench
NOCO
About the NOCO GC014
From our tech experts at CEN
The NOCO GC014 is a set of X-Connect XL battery clamps with removable M10 eyelets, for NOCO Genius and G Series chargers. Clip on for a quick connection, or remove the eyelets and fit them to the battery terminals for permanent plug-in charging. It uses heavier 14 AWG cable and a 20A mini blade fuse.
Who it suits
Owners of a GENIUS1, 2, 5, 10, 2X2 or 2X4, or a G750, G1100, G3500, G4 or G7200, with larger car, van or leisure battery terminals. It does not fit NOCO Boost jump starters. For motorcycle and small battery terminals, the GC001 micro clamps use M6 eyelets.
Our tech experts advise
Overall length is 63.5cm, with 53.3cm of cable, a little longer than the GC001. A hex wrench is included for removing the eyelets. Check that the M10 eyelets suit your terminal bolts before ordering. See all Genius accessories.
Explore the full NOCO range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all NOCO
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing


Frequently Asked Questions
Q: Which chargers is the GC014 compatible with?
A: NOCO GENIUS1, GENIUS2, GENIUS5, GENIUS10, GENIUS2x2 and GENIUS2x4, plus the G750, G1100, G3500, G4 and G7200 (all versions). It is not compatible with NOCO Boost jump starters.
Q: Can I mount the GC014 eyelets permanently?
A: Yes. Remove the M10 eyelets from the clamps and mount them directly to the battery terminals for a permanent plug-in access point.
Q: What's in the box with the GC014?
A: Positive and negative M10 (10 mm) eyelets to X-Connect cable, battery clamps and a hex wrench.



































