Kicker LX3000.1 Amp 1 Channel Mono Subwoofer Car Amplifier up to 3000w RMS
Couldn't Load Pickup availability
The Kicker LX3000.1 is a Class-D mono subwoofer amplifier from the Kicker LX-Series, delivering up to 3000W RMS at 1 ohm. It includes the LXRC dash remote with SHOCwave2.0 bass restoration.
The LX-Series mono amplifier is also available as the Kicker LX1650.1 (up to 1650W RMS).
Key specifications
- RMS power @ 14.4V: 3000W x 1 at 1 ohm, 2000W x 1 at 2 ohms, 1100W x 1 at 4 ohms
- Dynamic power: 3800W
- Frequency response: 10–160Hz (+0/–1dB)
- Crossover: low-pass 40–160Hz, 24dB/octave Linkwitz-Riley
- Subsonic filter: 10–80Hz, 24dB/octave
- KickEQ+ bass boost: 0–6dB, centre 20–80Hz
- Inputs: high level 1V–40V, low level 125mV–5V (FIT+ differential)
- Dimensions: 6 cm H x 21.4 cm W x 32 cm L
- Included: LXRC remote with 6m RJ45 cable
LX3000.1 Mono Amplifier
All LX-Series monoblock amplifiers include the LXRC dash remote with SHOCwave2.0™ bass restoration. The LX-Series is Kicker's high-power premium amplifier line, combining SQL design with high-output performance and the most-requested features from the industry.
From the Ground Up
The LX-Series is designed in-house from the ground up as Kicker's high-power premium amplifier line — built for precision control, flexibility and long-term reliability.
- Monitor and adjust with the included LXRC Dash Remote
- Class-D design for lower current draw, longer playing times and lower operating temperatures
- Gain-match LEDs indicate the correct gain setting
- KickEQ+™ parametric bass boost 0–6dB
- Reversible centre panel and choice of 11 RGB LED accent colours
- FIT+™ technology accepts low- and high-level signals up to 40V, with differential inputs to eliminate unwanted noise
- Choice of turn-on modes with comprehensive thermal, circuit and voltage-stability protections
Comes with the LX Remote Control (LXRC)
- Fingertip dash remote for bass level adjustment
- SHOCwave2.0™ (Sub-Harmonic Octave Creation) — Kicker's second-generation digital bass restoration algorithm that recovers lost low-bass frequencies
- Battery voltage displayed in a fuel-gauge-style readout
- RGB LED brightness control
- Output clipping indicator to prevent distortion and protect your system
- 6m (19.75 ft) RJ45 cable included
Explore the full range in Kicker Amplifiers.
Specification
| Frequency Response | [Hz] 10–160, +0/–1dB |
|---|---|
| Signal-to-Noise Ratio (a-weighted, re | rated power) >95dB |
| Signal-to-Noise Ratio (ref | 1W output) >75dB |
| Dimensions | [in, cm] Height 2-3/8 (6 cm) Width: 8-7/16 (21.4 cm) Length: 12-5/8 (32 cm) |
More specs
| |
What's Included
- LX3000.1 Mono Amplifier
- LX Remote Control LXRC
- 19.75 feet (6m) RJ45 cable
Kicker
About the Kicker 51LX30001
From our tech experts at CEN
A monoblock amplifier for subwoofer duty, rated at 3000w RMS. Everything it makes goes to the bass.
Who it suits
Anyone adding a subwoofer that needs real power behind it rather than a compact powered unit.
Our tech experts advise
Published power figures mean little until the amplifier is matched to the speakers and the gains are set with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge, the part we most often see done badly. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Kicker Amplifiers
More options from the same range, in stock and ready to go
Best Seller Kicker CXA1200.1 Amp 1 Channel Mono Subwoofer Car Amplifier up to 1200w RMS £399.95 /In stock
Save 4% Kicker 46CXA660.5 Amp 5 Channel Class A/B Full Range Car Amplifier up to 660w RMS RRP£469.95£449.95 / Save 4%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How much power does the Kicker LX3000.1 produce?
A: At 14.4V it delivers 3000W RMS at 1 ohm, 2000W RMS at 2 ohms and 1100W RMS at 4 ohms, with 3800W dynamic power.
Q: Does the LX3000.1 come with a bass remote?
A: Yes. The LXRC dash remote is included with a 6m (19.75 ft) RJ45 cable. It adjusts bass level, runs SHOCwave2.0 bass restoration, shows battery voltage, controls the RGB LED brightness and has an output clipping indicator.
Q: What bass controls does the LX3000.1 have?
A: A variable 40–160Hz low-pass crossover (24dB/octave Linkwitz-Riley), a 10–80Hz subsonic filter and KickEQ+ parametric bass boost of 0–6dB, centred anywhere from 20 to 80Hz.
