Shop All

Kicker 47QL7R122 Quad 12 Inch L7R Ported Loaded Subwoofer Enclosure 2400w RMS

£1,499.95 Out of stock
Out of Stock
SKU: 91886MPN: 47QL7R122

QUAD 12" L7R 2-Ohm Enclosure 47QL7R122

Four Kicker L7R 12-inch subwoofers, pre-loaded in a ported enclosure and ready to connect straight to your amplifier.

4 x 12 Loaded Subwoofer Enclosure Get seriously loud with this hardcore basshead box.

READY TO RUMBLE

With 2,400 watts of RMS power handling, this computer-designed subwoofer system delivers serious output without complicated installation.

GO LOW

Four Kicker L7R 12-inch subs come pre-loaded in this enclosure. The flared port is tuned to 31Hz for deep, heavy bass — no custom build required.

BRACED FOR IMPACT

Built from heavy birch-veneer plywood with thick internal bracing, this enclosure holds firm even at extreme SPL levels. It comes finished in black carpet with an embroidered Kicker logo, and is pre-wired to a pair of 2-ohm terminals. Just add an amplifier.

Specification
Impedance[Ohms] Dual 2-Ohm Terminals
SENSITIVITY[dB 1w/1m] 98
Box Depth (in, mm)28, 711
Box Height (in, mm)20-1/4, 514
Box Width (in, mm)35-7/8, 912
More specs
  • Type QUAD
  • Woofers/size [in, cm] 4 Solo-Baric L7R 12, 30
  • Recommended Amplifier Power (watts RMS) 2400
  • Tuning Frequency [Hz] 31
What's Included
  • Kicker QUAD 12" L7R Enclosure


Product information

Kicker

About the Kicker 47QL7R122

From our tech experts at CEN

A 12 inch subwoofer supplied in its enclosure, handling 2400w RMS, so box volume and tuning are already matched to the driver rather than left for you to work out.

Who it suits

Drivers who want bass without commissioning a custom build. A loaded enclosure is the quickest route to a result that works, because most disappointing subwoofer installs come down to the wrong box rather than the wrong driver.

Our tech experts advise

It still needs an amplifier matched to it and a fused power feed from the battery. How the box is secured matters too: an unrestrained enclosure is dangerous in an accident. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.