Shop All

Kicker 46CSS654 CS Series 6.5" 16cm 2 Way Car Door Component Speakers 100w RMS

£149.95 Out of stock
Out of Stock
SKU: 91099MPN: 46CSS654
Part of the Kicker CS Series Speakers · 14 products See the range →

The Kicker 46CSS654 is a CS Series 6.5" (160 mm) 2-way component speaker set, rated at 100W RMS. It features 3/4" titanium dome tweeters, 12 dB crossovers with a three-position tweeter level switch, and three tweeter mounting options for straightforward installation in most vehicles.

This listing is the 6.5" version. The Kicker CS Series component range is also available in 6.75" (46CSS674).

Key specifications

  • Woofer: 6.5" (160 mm)
  • Tweeter: 3/4" (20 mm) titanium dome, neodymium magnet
  • Power handling: 100W RMS, 300W peak
  • Frequency range: 35 Hz – 21 kHz
  • Crossover: 12 dB/octave at 4 kHz, tweeter level 0 / +3 / +6 dB
  • Woofer mounting hole: 123 mm
  • Woofer mounting depth: 43 mm
  • Tweeter flush mount: 40 mm hole, 14.5 mm depth
  • Grilles: bolt-through steel mesh

CS Series 6.5" 2-way component speakers

The CS Series uses a heavy-duty motor and magnet structure with EVC™ (Extended Voice Coil) technology to deliver strong bass response not found in stock speakers. Polypropylene cones with UV-treated ribbed surrounds ensure precise linear excursion and long-term reliability.

Separate titanium tweeters and 12 dB crossovers with tweeter level control let you tune the sound to suit your vehicle. Flush, angled, and surface-mount tweeter pods give you flexibility over imaging and placement. These speakers work best with 100W of recommended amplifier power. If you're after a coaxial option in a similar size, the Kicker 43DSC6504 DS Series 6.5" coaxial is worth considering.

  • Fits nearly every car
  • 12 dB crossovers with a compact footprint for easier installation
  • Three-position tweeter switch for adjusting high-frequency output
  • EVC™ (Extended Voice Coil) technology for improved bass response
  • Titanium tweeter construction with neodymium magnets
  • UV-treated poly-foam surround for precise linear excursion
  • Phase plugs in the woofer cones to reduce distortion
  • Steel mesh grilles to protect the drivers
  • Three tweeter mounting options: flush, angled, and surface pods
Specification
Size6.5 Inch
RMS Power100W
ShapeRound
TypeComponent
SeriesCSS
Article Number46CSS654
Country of ManufactureChina
More specs
  • Tweeter Size | in [mm] 3/4 [20]
  • Dome Material Titanium
  • Peak Power (watts, per ANSI/CTA-2031-A) 300
  • Recommended Amplifier Power (watts RMS) 100
  • Effective Frequency Range | Hz 35-21k
  • Woofer Mounting Hole Diameter | in [mm] 4 13/16 [123]
  • Woofer Bottom Mount Depth | in [mm] 1 11/16 [43]
  • Flush Mounting Tweeter Hole Diameter | in [mm] 1 9/16 [40]
  • Flush Mount Tweeter Depth | in [mm] 9/16 [14.5]
  • High Pass | dB, at Frequency | Hz 12, 4000
  • Low Pass | dB, at Frequency | Hz 12, 4000
  • High Frequency Output Attenuation | dB 0, 3, & 6
  • Bolt-Thru Grilles Yes
What's Included
  • CSS654 Speakers
  • Steel mesh grilles
  • Tweeters
  • Tweeter Mounts
  • Crossovers
  • Speaker Wire
  • Connectors
  • Eight Self-tapping screws
  • 8 Speed clips
  • Owner's manual
Product information

Kicker

About the Kicker 46CSS654

From our tech experts at CEN

A 6.5 inch component set, with separate tweeters that can be mounted higher up where you will actually hear them, rated at 100w RMS.

Who it suits

Drivers who want the best result from a door upgrade and are happy for tweeters to be mounted separately, which usually means a professional fit.

Our tech experts advise

Speaker sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering rather than guessing. Treating the door skin matters as much as the speaker: a good driver in an untreated door is doing half a job. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: Can I adjust the tweeter level on the Kicker 46CSS654?

A: Yes. Each crossover has a three-position switch for 0, +3 or +6 dB of tweeter output.

Q: How can the 46CSS654 tweeters be mounted?

A: There are three options: flush, angled and surface mount. Flush mounting needs a 40 mm hole and 14.5 mm of depth.

Q: What size hole do the 46CSS654 woofers need?

A: A 123 mm mounting hole, with 43 mm of mounting depth.