JL Audio 13TW5v2-2 13.5 Inch TW5 Series Shallow Mount Subwoofer 2 ohm 600w RMS
Couldn't Load Pickup availability
The JL Audio 13TW5v2-2 is a 13.5 inch (345 mm) TW5v2 thin-line subwoofer with a single 2 ohm voice coil and 600W RMS power handling. With a mounting depth of just 2.625 in (67 mm) and a 0.80 cu ft (22.7 litre) sealed enclosure, it is built for the most challenging installs.
This is the 2 ohm version. The 13TW5v2-4 is the same driver with a single 4 ohm voice coil.
Key specifications
- Size: 13.5 inch (345 mm)
- Power handling: 600W RMS
- Recommended amplifier power: 250 - 600W RMS
- Impedance: 2 ohm (single voice coil)
- Recommended sealed enclosure: 0.80 cu ft (22.7 litres)
- Mounting depth: 2.625 in / 67 mm
- Mounting hole diameter: 12.5 in / 318 mm
- Linear excursion (Xmax, one way): 0.433 in / 11 mm
13TW5v2-2: 13.5-inch (345 mm) Subwoofer Driver, 2 Ω
TW5v2 13.5-inch Subwoofer (600 W, 2 Ω)
We couldn’t leave the ultimate thin woofer alone... we had to make it even better.
Our patented thin-line woofer technology compresses the architecture of the 13TW5v2 using a “concentric tube” structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the speaker than with conventional designs, while allowing excellent linear excursion capability and mechanical stability.
To unleash even more performance from this technology, the v2 improves upon the original 13TW5 with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is also available in single 2 ohm and single 4 ohm voice coil versions to fit a wide range of applications.
In keeping with its “tight-spaces” mission, the 13TW5v2 is optimised for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.
The 13TW5v2 is best used with amplifier power in the 250W - 600W range and is optimised to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
Never has such high-quality sub-bass been possible in the most challenging installation applications.
Explore the full range in JL Audio Subwoofers.
Specification
| Overall Diameter (A) A1 | 14.2 in / 361mm |
|---|---|
| A2 | 13.0 in / 330 mm |
| Mounting Depth | (E) 2.625 in / 67 mm |
More specs
| |
What's Included
- 13TW5v2-2
- Warranty information
- JL Audio stickers
JL Audio
About the JL Audio 13TW5v2-2
From our tech experts at CEN
A JL Audio 13.5 inch TW5 Series subwoofer driver, shallow mount for vehicles where depth rules out a conventional sub, 2 ohm, handling 600w RMS.
Who it suits
Drivers building a system around a properly specified enclosure rather than a box off the shelf. TW5 is the most capable of the thin-line drivers.
Our tech experts advise
This is a driver, not a finished system: enclosure volume and tuning decide most of what you hear, and JL publish specifications worth building to, and the 2 ohm coil decides how it should be wired to your amplifier. We build enclosures to suit both driver and vehicle at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from JL Audio Subwoofers
More options from the same range, in stock and ready to go
Best Seller JL Audio CP112-W0V3 Sub 12" Single W0 BassWedge Ported Subwoofer 300w RMS £309.00 /Low stock
Best Seller JL Audio 10TW3-D4 10 Inch TW3 Series Shallow Mount Subwoofer Dual 4 ohm 400w RMS £409.00 /In stock
Staff Pick JL Audio 10W0v3-4 10" 25cm W0 Series Car Sub Subwoofer Driver 4ohm 300w RMS £159.00 /In stock
JL Audio 12W7AE-3 W7 Series Anniversary Edition 12 Inch Sub Subwoofer 1000w RMS £1,199.00 /Low stock
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: What amplifier power does the JL Audio 13TW5v2-2 need?
A: JL Audio recommends 250 - 600W RMS of amplifier power for the 13TW5v2-2. It is rated at 600W RMS continuous power handling (2 ohm impedance).
Q: What box size is recommended for the 13TW5v2-2?
A: The 13TW5v2-2 is optimised for a 0.80 cu ft (22.7 litres) sealed enclosure. Full enclosure details are in the Specification tab.
Q: How deep is the 13TW5v2-2 and what cut-out does it need?
A: The 13TW5v2-2 has a mounting depth of 2.625 in / 67 mm and needs a mounting hole (cut-out) diameter of 12.5 in / 318 mm.
Q: Will the 13TW5v2-2 fit where a 12-inch subwoofer goes?
A: The 13TW5v2 mounting system is designed to fit in about the same footprint as a typical 12-inch woofer, and its enclosure requirement is far smaller than most 12-inch woofers need.
