JBL Club A1000 Amp 1 Channel Mono Class D Subwoofer Amplifier 1000w RMS
Couldn't Load Pickup availability
The JBL Club A1000 is a mono Class D subwoofer amplifier from JBL's Club range, delivering 1000W RMS at 2 ohms (600W RMS at 4 ohms). It includes speaker-level inputs, a variable low-pass filter, bass boost, phase switch and a wired bass remote, making it compatible with factory radios and aftermarket head units alike.
Key specifications
- Channels: 1 (mono)
- Power: 600W RMS x 1 at 4 ohm, 1000W RMS x 1 at 2 ohm
- Class: D
- Frequency response: 10 – 320 Hz
- Low-pass filter: 32 – 320 Hz, 12 dB/octave
- Bass boost: 0 – 12 dB at 45 Hz
- Inputs: preamp and speaker-level
- Fuses: 35A x 3
- Dimensions: 320 x 51.3 x 180 mm
Value-engineered car amplifier with JBL power and performance
The Club A1000's Class D design delivers 1000W RMS with high efficiency and low current draw, reducing strain on your car's electrical system.
Speaker-level inputs allow the amplifier to integrate into almost any system, including those using a factory radio.
The variable low-pass filter and bass boost let you tune the output to suit your subwoofer and enclosure, while the phase switch helps blend bass with your full-range speakers. The included wired bass remote gives you level control from the driver's seat.
If you need less power, the JBL Stage GT 50011 is a 500W RMS mono subwoofer amplifier worth considering.
Explore the full range in JBL Club & Stadium.
Specification
| frequency response | 10-320 Hz |
|---|---|
More specs
| |
What's Included
- Club A1000 mono subwoofer car amplifier
- 35A ATO fuses (3 installed, 3 spare)
- Bare wire-to-RCA adapters
- Remote bass control module
- 16.5' Remote control cable (RJ-25 plugs on both ends)
- Self-tapping screws for remote (M3 x 15mm)
- Mounting screws (M4 x 53mm)
- JBL stickers
- Owner's manual
JBL
About the JBL CLUB A1000
From our tech experts at CEN
A monoblock subwoofer amplifier from JBL, rated at 1000w RMS.
Who it suits
Anyone adding a subwoofer that needs more than a powered unit can give it.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full JBL range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JBL
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from JBL Club & Stadium
More options from the same range, in stock and ready to go
Save 18% JBL Club 1024 10 Inch 2 or 4 Ohm Car Subwoofer 250w RMS RRP£139.99£114.99 / Save 18%Low stock
Save 10% JBL Stadium 62CF 6.5 Inch 2 Way Component Car Door Speaker System 110w RMS RRP£399.99£359.99 / Save 10%Low stock
Save 17% JBL Stadium 62F 6.5 Inch 2 Way Coaxial Car Door Speakers 85w RMS Pair RRP£229.99£189.99 / Save 17%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How much power does the JBL Club A1000 deliver?
A: It delivers 1000W RMS x 1 at 2 ohms or 600W RMS x 1 at 4 ohms.
Q: Does the Club A1000 include a bass remote?
A: Yes. A remote bass control module and 16.5 ft remote cable are included.
Q: What power cable does the Club A1000 need?
A: JBL recommends 4-gauge power and ground leads. Wiring is not included with the amplifier.
