Shop All

Goldring E2 Cartridge & Stylus E Series Moving Magnet Vinyl Turntable Spherical

RRP £79.00 £74.00 Save 6%
Low stock
SKU: 90606MPN: GL0056

The Goldring E2 is the middle model in the E Series of moving magnet (MM) phono cartridges, featuring a 0.6 mil spherical stylus on an aluminium cantilever.

This listing is the E2. The Goldring E Series is also available as the Goldring E1.

Key specifications

  • Type: moving magnet (MM)
  • Cantilever: aluminium
  • Stylus: spherical, 0.6 mil
  • Output: 3.5 mV (1 kHz at 5 cm/sec)
  • Frequency response: 20 Hz to 20 kHz
  • Playing weight: 1.75 g to 2.25 g (2.0 g recommended)
  • Load resistance: 47 kΩ
  • Fixing centres: 12.7 mm (0.5 in)
  • Body colour: green

Goldring E2 MM moving magnet cartridge and stylus

Goldring designs the E Series to accurately reproduce the original record production — preserving the musicality, rhythm and detail the artist intended. Each cartridge is straightforward to fit to most budget and mid-priced turntables.

The E2 sits in the middle of the range. It shares the same spherical stylus profile as the Goldring E1 but adds an aluminium cantilever. The stiffer, lighter cantilever traces medium to high frequencies more accurately, delivering more detail and reducing distortion and mis-tracking on loud passages.

Magnetic Duplex Technology™

Every E Series cartridge uses Magnetic Duplex Technology™ — a dual-magnet generator assembly with the same geometry as the original cutting head. This reproduces stereo groove information more accurately, improving channel separation and soundstage.

Expert adjustment

E Series cartridges include a production-stage adjustment screw that pre-sets the stylus angle relative to the record surface. No horizontal tracking adjustment is needed during fitting. The result is optimised channel balance and consistent performance throughout the product's life.

Stylus and cantilever

The E1 and E2, both fitted with spherical styli, make straightforward upgrades over budget, pre-fitted or obsolete cartridges. The E3 steps up to a super-elliptical stylus for those wanting to extract more detail from the groove.

Specification
ColourGreen
CantileverAluminium
Stylus profileSpherical
Stylus radius0.6 mil
Frequency range20 Hz - 20 kHz
Channel balance1.5 dB at 1 kHz
Channel separation>20 dB at 1 kHz
Sensitivity3.5 mV (1 kHz @ 5 cm/sec)
Static compliance20 mm/N
Vertical tracking angle24°
Load resistance47 kΩ
Load capacitance100 - 200 pF
Internal inductance400 mH
Internal resistance470 Ω
Cartridge mass6.8 g
Fixing centres12.7 mm (0.5 in)
Playing weight1.75 g - 2.25 g (2.0 g recommended)
What's Included
  • Goldring E2 Cartridge
Product information

Goldring

About the Goldring GL0056

From our tech experts at CEN

The Goldring E2 is the middle model in Goldring's E Series moving magnet (MM) cartridge range. It has a 0.6 mil spherical stylus on an aluminium cantilever, which traces mid and high frequencies more accurately, reducing distortion on loud passages. Output is 3.5 mV; recommended tracking force is 2.0 g.

Who it suits

The E2 suits anyone replacing a worn, budget or obsolete cartridge on a mid-priced turntable. Those wanting more groove detail can step up to the Goldring E3 with its super-elliptical stylus, or the Goldring E1 offers a simpler entry-level option.

Our tech experts advise

The E2 uses standard 12.7 mm (0.5 in) fixing centres and fits most turntables with a standard half-inch headshell. Set tracking force to 2.0 g and ensure your phono stage is set to the standard 47 kΩ MM load. No horizontal tracking adjustment is needed — the stylus angle is factory-set. See the full Goldring collection.

Explore the full Goldring range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Goldring

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Frequently Asked Questions

Q: Will the Goldring E2 fit my turntable?

A: Goldring designed the E Series to be simple to fit to the majority of budget to medium priced turntables. It uses standard 12.7 mm (half inch) fixing centres; check that your tonearm can be set to the recommended playing weight.

Q: What tracking force does the Goldring E2 need?

A: The recommended playing weight is 1.75 g to 2.25 g, with 2.0 g recommended.

Q: How does the E2 differ from the E1?

A: The E2 keeps the 0.6 mil spherical stylus of the E1 but replaces its carbon cantilever with a stiffer, lighter aluminium cantilever for more accurate tracing of medium to high frequencies.