





Dodo Mat DEADN Duo Roll 5m Car Van 4.5mm Sound Deadening Thermo Insulation Foam
Couldn't Load Pickup availability
Dodo Mat DEADN Duo Roll is a 4.5mm two-in-one sound deadening and thermal insulation roll from Dodo Mat, combining a 1.5mm butyl rubber deadening layer with a 3mm closed cell foam insulation layer in a single peel-and-stick application. One 5m roll covers 2.5 sq.m, making it well suited to van and camper conversion floors, footwells and boot areas.
Key specifications
- Total thickness: 4.5mm with strong adhesive
- Deadening layer: 1.5mm aluminium and pure butyl
- Insulation layer: 3mm closed cell thermo acoustic foam
- Roll size: 50cm x 500cm
- Coverage: 2.5 sq.m (26.9 sq.ft)
- Heat resistance: -50°C to +150°C
- Flammability: tested for vehicle interiors to ISO 3795:1989
Dodo Mat DEADN Duo Roll: Sound Deadening with Foam Top Layer
Pack coverage 2.5 sq.m (26.9 sq.ft), 50cm x 500cm roll
Typical uses:
- Load area underlay for van and camper conversions.
- Reducing road, transmission and exhaust noise in front footwells and boot areas.
- Lining metal cabinets or machine housings.
With soundproofing and insulation combined in one product, simply peel and stick onto the metalwork in a single step. It kills vibrations, blocks noise and insulates the panel.
Sound deadening layer
The 1.5mm butyl rubber deadening layer reduces panel vibration and acts as a barrier to airborne noise. A higher rubber-to-mineral-filler ratio improves vibration damping and noise reduction. Applied to interior sheet metal, DEADN Duo destroys unwanted vibrations and structural noise. If you need deadening without a foam top layer, Dodo Mat also offers the DEADN Hex in a 50-sheet pack.
Insulation layer
DEADN Duo features an integral 3mm Dodo Super Liner top layer. This closed cell foam has excellent thermal and acoustic properties. It acts as a thermal insulating layer to help stabilise cabin temperatures throughout the year and reduce the risk of condensation forming.
Convenience
Supplied as one continuous 5m roll (50cm wide), making it ideal for custom work and large floor areas. If you need a thicker foam-only liner, the Dodo Mat DEAD-EZY Liner 5m Roll offers a 5mm insulation layer over the same 2.5 sq.m coverage.
Explore the full range in Dodo Mat.
Specification
| Series | DEADN Duo |
|---|---|
| Article Number | DOD-DUO-ROLL |
| Country of Manufacture | China |
More specs
| |
What's Included
- Dodo Mat DEADN Duo 4.5mm 5m Roll
Dodo Mat
About the Dodo Mat DOD-DUO-ROLL
From our tech experts at CEN
Acoustic absorbing foam, for soaking up the reflections a hard-surfaced vehicle interior creates, 5mm from Dodo Mat.
Who it suits
Van and camper conversions, and anywhere road and wind noise is the problem rather than panel resonance. Foam and butyl do different jobs and work best together.
Our tech experts advise
Coverage matters more than thickness: treat the outer skin behind the speaker first, then the inner. It is messy, fiddly work inside a door, which is why we normally do it as part of an install rather than sell it as a weekend job. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Dodo Mat range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Dodo Mat
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Frequently Asked Questions
Q: How much sound deadening do I need for my car?
A: As a guide, a pair of front doors takes around 1 to 1.5 square metres, and a full car between 4 and 6 square metres depending on coverage. The sheet coverage for this product is listed in the Specification tab.
Q: Where should I apply sound deadening first?
A: Doors give the biggest gain for both road noise and speaker performance, followed by the boot floor and wheel arches. Even a doors-only install noticeably tightens speaker bass.
Q: Is sound deadening difficult to fit myself?
A: It is one of the more DIY-friendly upgrades: panels are cut to shape, peeled and rolled firmly onto clean metal. A roller tool and panel removal tools make the job much easier, or CEN can carry out installation from our Nottingham premises.
Q: Will sound deadening improve my audio system?
A: Yes. Deadening the doors reduces panel resonance so speakers produce cleaner, tighter bass, and lowering road noise means you hear more detail at normal volumes.
Q: Do I need separate insulation on top of DEADN Duo?
A: DEADN Duo already combines a 1.5mm butyl deadening layer with a 3mm closed cell foam insulation layer, so floors and boot areas are deadened and insulated in one application.
Q: Does Dodo Mat DEADN Duo need heating to fit?
A: No. It is soft and flexible and does not require heating. Simply peel and stick it onto clean metalwork.


























