Audison Thesis THG 6.5 II Steel Mesh Grilles Pair for Orchestra Coro Sax Woofers
Couldn't Load Pickup availability
The Audison Thesis THG 6.5 II are a pair of optional fine steel mesh grilles designed specifically for the TH 6.5 II Sax woofer, used in the TH K2 II Coro and TH K3 II Orchestra speaker kits. They are part of Audison's flagship Thesis range.
For the matching tweeter grilles, see the Audison Thesis THG 1.5 II.
Key specifications
- Fits: TH 6.5 II Sax woofer
- Compatible kits: TH K2 II A Coro, TH K2 II P Coro, TH K3 II A Orchestra
- Material: fine steel mesh
- Dimensions: 171.2mm x 24.5mm x 12mm
- Supplied as: pair
Thesis THG 6.5 II: optional mesh grilles for TH 6.5 II Sax
Thesis
Audison's Thesis speaker range was built around a single principle: transparency — a direct inheritance of the HV Venti. The goal was to give voice to the pure musical message of Thesis electronics by overcoming the intrinsic limits of traditional loudspeakers. Audison's R&D team used finite element simulation software (FEM) to develop a mathematical model, which — through extensive prototyping — resulted in their ideal transducer design.
The THG 6.5 II grilles are constructed from the finest steel mesh with no compromise on quality, providing both protection and a clean finish for TH 6.5 II Sax woofer installations.
Explore the full range in Audison Thesis.
Specification
| Shape | Round |
|---|---|
| Type | Grills |
| Series | Thesis |
| Article Number | THG 6.5 II |
| Country of Manufacture | China |
More specs
| |
What's Included
- Audison THG 6.5 II Grilles Pair
Audison
About the Audison THG 6.5 II
From our tech experts at CEN
The Audison Thesis THG 6.5 II is a pair of optional fine steel mesh grilles for the TH 6.5 II Sax woofer. They fit the Sax as used in the TH K2 II A Coro, TH K2 II P Coro and TH K3 II A Orchestra kits, and measure 171.2 x 24.5 x 12 mm.
Who it suits
Thesis owners whose woofers sit exposed in a door, kick panel or custom baffle, where a grille protects the cone and finishes the install. For the active Coro kit, see the TH K2 II A Coro, and for matching tweeter grilles the THG 1.5 II.
Our tech experts advise
They are made for the TH 6.5 II Sax only. Check the 24.5 mm depth against door card clearance before ordering if the woofer sits behind factory trim. Door treatment does more for a Sax woofer than anything in front of it. See car audio installation.
Explore the full Audison range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Audison
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
More from Audison Thesis
More options from the same range, in stock and ready to go
Audison Thesis THG 3.0 II Steel Mesh Grilles for Orchestra Voce Midrange Speaker
RRP £189.99Save 31%£129.99
Audison Thesis TH K2 II P CORO Sax Violino 2 Way Passive Component Kit 150w RMS
£2,499.99
Audison Thesis TH Quattro Amplifier Class A 4 Channel Stereo Amp 1040w RMS
£3,999.99
Audison Thesis HV Venti Amplifier Class A 2 Channel Dual Mono Amp 1600w RMS
£11,999.99
Audison Thesis TH K2 II A CORO Sax Violino 2 Way Active Component Kit 150w RMS
£1,949.99
Frequently Asked Questions
Q: Which speakers do the THG 6.5 II grilles fit?
A: They are made for the Audison TH 6.5 II Sax woofer, which is used in the TH K2 II A Coro, TH K2 II P Coro and TH K3 II A Orchestra kits.
Q: Are the THG 6.5 II grilles sold as a pair?
A: Yes. The box contains a pair of Audison THG 6.5 II grilles.
Q: What size are the THG 6.5 II grilles?
A: They measure 171.2mm x 24.5mm x 12mm.
