Shop All

Audison Prima APK 163 6.5" Woofer 4" Mid 1" Tweeter Component Speakers 125w RMS

£329.99
In stock
SKU: 90216MPN: APK 163
Part of the Audison Prima range · 53 products See the range →

The Audison Prima APK 163 is a 3-way component speaker kit from the Audison Prima range, comprising a 6.5" (165mm) woofer, 4" midbass and 1" tweeter, rated at 125W RMS / 375W peak at 4 ohms.

This listing is the APK 163 3-way kit. The Audison Prima component speaker range is also available as the APK 165P 2-way component kit.

Key specifications

  • Configuration: 3-way component kit (AP 1 tweeter + AP 4 midbass + AP 6.5 woofer)
  • Woofer: 165mm, 32mm copper voice coil
  • Tweeter: 26mm diaphragm
  • Power handling: 125W continuous, 375W peak
  • Impedance: 4 ohm
  • Sensitivity: 93.5 dB
  • Frequency response: 50 Hz – 20 kHz
  • Crossovers: separate passive crossover per driver; tweeter attenuation switch (0 dB, +2 dB)
  • Includes: grilles and crossovers

Audison Prima APK 163

3-way kit | 375W peak power | 4 ohm | AP 1 + AP 4 + AP 6.5 + grilles + crossover

Audison Prima is designed for enthusiasts who want to hear every detail of their music while integrating cleanly into an OEM system. The priority throughout the range is space-efficient OEM replacement.

The APK 163 pairs the AP 1 tweeter, AP 4 midbass and AP 6.5 woofer with a dedicated crossover for each driver. This approach simplifies OEM speaker replacement without routing extra cables through the door — avoiding any risk to the car warranty.

  • AP 1 tweeter: 26mm diaphragm with wide-roll surround for high efficiency and reduced resonance frequency.
  • AP 1 tweeter: acoustic lens compensates for in-car frequency response anomalies in the 10 kHz–13 kHz band caused by restrictive OEM grilles.
  • APCX TW compact tweeter passive crossover with attenuation switch (0 dB, +2 dB) to tune in-car response; APCX MD midbass crossover and APCX WF woofer crossover — all optimised for OEM integration.
  • AP 4 midbass: extended frequency response with high efficiency.
  • AP 6.5 woofer: 32mm pure copper voice coil for high power handling and low-frequency control.
  • AP 6.5 woofer and AP 4 midbass: water-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and optimised with the Klippel R&D Scan Vibrometer.
  • AP 6.5 woofer and AP 4 midbass: reduced mounting depth for easier fitting in OEM locations.
  • AP 6.5 woofer and AP 4 midbass: TPU (thermoplastic polyurethane) edge with shallow "TripleWave" profile for maximum linearity of excursion.
  • AP 6.5 woofer and AP 4 midbass: compact basket with abrasion-resistant, scratch-proof coating; motor fixed with damping epoxy adhesive.
  • AP 6.5 woofer: high-current fast-on terminal with double contact on positive and negative poles; temperature-resistant plastic cover protects against accidental short circuits.
  • Developed using the Klippel suite.
Specification
MagnetMaterial Woofer    HIGH DENSITY FLUX FERRITE
ConeMaterial Woofer    WATER REPELLENT PRESSED PAPER
Power Handling- Peak    375 W
Power Handling- Continuous    125 W
Sensitivity   93.5 dB
Impedance   4 Ohm
Frequency Response   50 ÷ 20k
WeightWoofer    0.78 kg
WeightTweeter    0.04 kg
More specs
  • Woofer Size    165 mm
  • Tweeter Size    26 mm
  • Woofer Voice Coil Diameter    32 mm
  • Dome Material Tweeter    TELOTON FIBRE
  • Crossover Woofer    Low Pass @ 600 Hz - 6 dB Oct
  • Crossover Tweeter    High Pass @ 3,5 kHz - 6 dB Oct
  • Spl Woofer    89.5 dB
What's Included
  • Audison Prima APK 163 Speakers
Product information

Audison

About the Audison APK 163

From our tech experts at CEN

Audison Prima 6.5 inch two-way component speakers, with separate tweeters for mounting where you will actually hear them, rated at 125w RMS.

Who it suits

Drivers building a proper front stage, happy for tweeters to be mounted separately, which usually means a professional fit. Prima is the accessible end of the Audison range and still built to the same thinking.

Our tech experts advise

Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering. Door treatment matters as much as the speaker, and Audison drivers repay amplification and tuning. Installation and tuning are priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Audison range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Audison

Audison News & Guides

The latest Audison product news, launches and guides from the CEN team in Nottingham.

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Elettromedia Brands

Evolution of technology and art of sound

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: Is the Audison Prima APK 163 a 2-way or 3-way system?

A: It is a 3-way system made up of the AP 1 26mm tweeter, AP 4 midbass and AP 6.5 165mm woofer, each with its own passive crossover.

Q: Do I need to run extra cables through the door to fit the APK 163?

A: No. Each speaker has its own dedicated crossover, which simplifies OEM speaker replacement and avoids routing additional cables through the door.

Q: What is the power handling of the APK 163?

A: 125W continuous and 375W peak at 4 ohms, with 93.5 dB sensitivity.