Shop All

Audison Prima AP 690 6x9" Car Midbass Woofer Parcel Shelf Door Speakers 100w RMS

£129.99
In stock
SKU: 90194MPN: AP 690

The Audison Prima AP 690 is a 6×9" midbass woofer from the Audison Prima range, handling 100W RMS (300W peak) at 4 ohms. Designed for car doors and parcel shelves that accommodate elliptical speakers, it can run without a crossover filter thanks to its mechanical cut-off.

This listing is the AP 690 6×9". The Audison Prima midbass woofer range is also available as the AP 8 8" 100W RMS and the AP 6.5 6.5" 70W RMS.

Key specifications

  • Size: 6×9 in
  • Power handling: 100W RMS, 300W peak
  • Impedance: 4 ohms
  • Frequency response: 40 Hz–5 kHz
  • Sensitivity: 95 dB
  • Voice coil: 25 mm pure copper
  • Magnet: High-density flux ferrite
  • Cone: Water-repellent treated paper
  • Fs: 55 Hz

Audison Prima

Audison Prima is designed for car enthusiasts who want to hear all the detail in their music while integrating cleanly with OEM systems. Space is a core design requirement throughout the range.

The AP 690 is built for car models with doors designed to house elliptical speakers. Audison's R&D team optimised the electro-acoustic parameters specifically for door installation, keeping the basket compact to simplify fitting.

  • 25 mm pure copper voice coil for high power handling and precise low-frequency control.
  • Water-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and refined with a Klippel R&D Scan Vibrometer.
  • Reduced mounting depth for straightforward installation in OEM positions.
  • "Triple Wave" surround profile for maximum excursion linearity.
  • Compact basket with abrasion-resistant, scratchproof coating; motor secured with damping epoxy adhesive.
  • High-current fast-on terminals with double contact on both positive and negative poles for flexible, quick connection.

The mechanical cut-off of the woofer cone and dust cap system allows use without a filter, maximising efficiency and making the AP 690 easy to drive with any amplifier type. The large voice coil delivers high power handling and precise control through aggressive dynamic transients. Double Faston connectors with a direct link to the tweeter speed up installation and ensure a reliable, permanent contact.

Specification
Power Handling- Peak    300 W
Power Handling- Continuous    100 W
Impedance   4 Ohm
Frequency Response   40 - 5 k Hz
MagnetMaterial    HIGH DENSITY FLUX FERRITE
ConeMaterial    WATER-REPELLENT TREATED PAPER CONE
More specs
  • Size    6 x 9 in
  • Xmax    4 mm
  • Re    3.1 Ohm
  • Fs    55 Hz
  • Vas    37.1 l
  • Mms    17 g
  • Cms    0.5 mm/N
  • BL    5.3 T•m
  • Qms    7
  • Qts    0.6
  • Le Standard    0.2 mH
  • Spl    95 dB
What's Included
  • Audison Prima AP 690 Speakers
Product information

Audison

About the Audison AP 690

From our tech experts at CEN

Audison Prima midbass drivers, 6x9 inch, handling 100w RMS, built to cover one band in a multi-way front stage.

Who it suits

Drivers building an active or multi-way system where each driver has a defined job and a processor sets the crossover points. Prima is the accessible end of the Audison range and still built to the same thinking.

Our tech experts advise

Drivers like this assume amplification and processing: the crossover points and mounting locations matter as much as the hardware. get in touch and we will help specify the front stage. See car audio installation.

Explore the full Audison range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Audison

Audison News & Guides

The latest Audison product news, launches and guides from the CEN team in Nottingham.

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Elettromedia Brands

Evolution of technology and art of sound

Frequently Asked Questions

Q: Will these speakers fit my car?

A: The AP 690 is a 6x9 inch elliptical woofer for doors designed to take elliptical speakers. Mounting depth and fitting adapters vary by vehicle, so contact CEN with your registration and we will confirm fitment and any adapters you need.

Q: Does the AP 690 need a crossover?

A: It can be used without a filter, as the mechanical cut-off of the cone and dust cap system rolls off the high frequencies naturally.

Q: What power does the AP 690 handle?

A: It is rated at 100 W RMS and 300 W peak, with 4 ohm impedance.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.