




Anker SOLIX C2000 Gen 2 Power Station + PS200 Solar Panel + Alternator Charger + Bidirectional Cable
Couldn't Load Pickup availability
This bundle pairs the Anker SOLIX C2000 Gen 2, a 2,048Wh LiFePO4 portable power station with 2,400W rated and 4,000W peak output, with the Anker SOLIX PS200 200W bifacial portable solar panel, the 800W Anker SOLIX Alternator Charger and the 1 m Expansion Port Bidirectional Cable for reverse charging your vehicle battery, so you can recharge from the sun, from the mains and from your vehicle while you drive. It suits campervans, motorhomes, overlanding and off-grid use.
The C2000 Gen 2, PS200 solar panel, Alternator Charger and Bidirectional Cable are also sold separately.
Key specifications
- Capacity: 2,048Wh (51.2V / 40,000mAh), LiFePO4, 4,000 cycles
- AC output: 230V, 2,400W rated, 4,000W peak, SurgePad up to 3,000W
- AC charging: up to 2,300W, 80% in 45 minutes, 100% in 58 minutes
- Solar input: up to 800W via XT-60i (11 to 60V)
- Alternator charging: 800W, 100% in about 3 hours
- Outputs: 4 AC, 2 x USB-C 140W, USB-C 15W, USB-A 12W, 12V car outlet
- UPS switchover: 10 ms
- Size and weight: 459 x 250 x 257 mm, 18.9 kg
- Solar panel: PS200 200W bifacial, N-type cells, 25%+ efficiency, IP68
- Alternator Charger: 800W, 12V and 24V vehicles
- Bidirectional cable: 1 m, 25A, for vehicle battery reverse charging
Anker SOLIX C2000 Gen 2
- Ultra-efficient power for longer runtime: only 9W idle power consumption, powering a dual-door fridge for up to 32 hours.
- Up to 4kWh expandable capacity: with a BP2000 (Gen 2) Expansion Battery, the C2000 Gen 2 can keep a dual-door fridge running for up to 64 hours.
- Fast recharging: with AC and solar power, 80% in 45 minutes and 100% in 58 minutes.
- 4,000W peak power: power appliances with 2,400W rated power and up to 4,000W peak.
- Light and compact: weighing 18.9 kg and measuring 459 x 250 x 257 mm.
With 4 AC outlets, 2 x USB-C up to 140W, USB-C 15W, USB-A 12W and a 12V car outlet (120W), you can power your most important devices at the same time. At home it also works as a UPS, switching to battery power within 10 ms during a power cut.
Anker SOLIX PS200 Bifacial Portable Solar Panel
- 200W output with N-type solar cells rated at over 25% conversion efficiency.
- Bifacial design captures up to 10% more power from the rear surface in reflective areas such as snow, sand or concrete.
- IP68 water and dust resistance, with a reinforced aluminium frame.
- Light to carry at 5 kg including the stand.
Anker SOLIX Alternator Charger
- Charge while you drive at up to 800W, up to 8x faster than a car auxiliary port.
- Works with 12V and 24V vehicles and lead acid (FLD, GEL, AGM, Calcium) or LiFePO4 starter batteries.
- Smart app control via Bluetooth or Wi-Fi to start or stop charging, switch modes and adjust power.
- Protection against reverse polarity, overcurrent, short circuit, and over and undervoltage.
Expansion Port Bidirectional Cable for reverse charging
The Alternator Charger can reverse charge a weak or depleted vehicle battery from the power station, but that needs an expansion port cable, which is not included with the charger on its own. This bundle includes the 1 m Anker SOLIX Expansion Port Output Bidirectional Cable (25A), so reverse charging works out of the box with the C2000 Gen 2.
Explore the full range in Solar Generator Bundles.
Specification
| Battery | Type LFP (LiFePO4) |
|---|---|
| Dimensions | 459 × 250 × 257 mm |
More specs
| |
What's Included
- Anker SOLIX C2000 Gen 2
- AC Charging Cable
- User Manual
- PS200 Bifacial Portable Solar Panel
- 2 × Solar Charging Cable (2.5 m)
- XT60i Solar Charging Cable (0.5 m)
- Quick Start Guide
- Anker SOLIX Alternator Charger
- Battery Connection Cable (7 m)
- PPS XT-60i Port Connection Cable (1 m)
- Installation Board
- Screw (×6)
- Manual
- Anker SOLIX Expansion Port Output Bidirectional Cable (1 m)
Other bundles for this product
Anker
Explore the full Anker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Anker

Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Anker News & Guides
The latest Anker product news, launches and guides from the CEN team in Nottingham.
Anker SOLIX C2000 Gen 2
Anker C2000 Gen 2 Review: Powerful Portable Energy for Home, RV & Outdoor Use If you’re looking for a reliable,...
New at CEN: Anker SOLIX S2000 — 2kWh of Off-Grid Power Built to Last 15 Years
The Anker SOLIX S2000 has arrived at CEN: 2kWh of LFP capacity rated for 10,000 charge cycles, recharged six different...
Powering Your Adventures: Introducing the Anker SOLIX F3000 Portable Battery
Boasting an impressive 3,072Wh capacity, the SOLIX F3000 is a true powerhouse, capable of keeping your devices charged for extended...
Frequently Asked Questions
Q: What's included in the C2000 Gen 2 + PS200 + Alternator Charger + Bidirectional Cable bundle?
A: Anker SOLIX C2000 Gen 2; AC Charging Cable; User Manual; PS200 Bifacial Portable Solar Panel; 2 x Solar Charging Cable (2.5 m); XT60i Solar Charging Cable (0.5 m); Quick Start Guide; Anker SOLIX Alternator Charger; Battery Connection Cable (7 m); PPS XT-60i Port Connection Cable (1 m); Installation Board; Screw (x6); Manual; Anker SOLIX Expansion Port Output Bidirectional Cable (1 m).
Q: How fast does the Alternator Charger recharge the C2000 Gen 2?
A: The Alternator Charger provides 800W charging from your vehicle while driving, up to 8 times faster than a standard car socket, taking the C2000 Gen 2 to 100% in about 3 hours.
Q: How do I charge the C2000 Gen 2 from the PS200 panel?
A: Connect the PS200 to the power station's XT-60i solar input using the supplied XT60i solar charging cable. Solar and AC charging can be used together, with solar taking priority.
Q: What is the Bidirectional Cable for?
A: It lets the power station reverse charge your vehicle's starter battery through the Alternator Charger, which is useful after long periods of inactivity or heavy additional loads. The Alternator Charger does not include this cable on its own.
Q: Can the C2000 Gen 2 be used as a UPS?
A: Yes. It switches over in 10 ms, so it can keep equipment such as laptops and routers running during a power cut.






































