Anker SOLIX Alternator Charger for Power Stations Upto 800w & Reverse Charging

The Anker SOLIX Alternator Charger charges a compatible Anker SOLIX portable power station from your vehicle's alternator or starter battery at up to 800W while you drive, and can reverse charge a weak vehicle battery. It is part of the Anker SOLIX accessory range, aimed at camper van, van and work vehicle owners.

Key specifications

• Charging power: Up to 800W
• Vehicle systems: 12V and 24V
• Battery types: Lead acid (FLD, GEL, AGM, Calcium) and LiFePO4 (LFP)
• Charging modes: Ultrafast PPS charging, RV expansion, vehicle battery recharge
• Bidirectional: Reverse charging of the vehicle battery (expansion port cable sold separately)
• Compatible power stations: Anker SOLIX C2000 Gen 2, C1000 Gen 2, C1000X and F3000
• Control: App via Bluetooth or Wi-Fi
• Protection: Reverse polarity, overcurrent, short circuit, over and undervoltage
• Cables supplied: 7 m battery connection cable, 1 m PPS XT-60i cable

Anker SOLIX Alternator Charger overview

• Fast charging: Up to 8x faster than a car auxiliary port. A 2kWh power station can be charged 0–100% in approximately 3 hours.
• Three flexible charging modes: Ultrafast PPS charging, seamless RV expansion, and efficient vehicle battery recharge.
• Extra 12kWh capacity for RVs: Pair with the F3000 and 3 expansion batteries for up to 12kWh additional capacity.
• Supports 99% of RVs and fuel vehicles: Select your battery type and the charger automatically adjusts to protect your battery.
• Smart app control: Start or stop charging, switch modes, and adjust power remotely via Bluetooth or Wi-Fi.
• Compatible with multiple SOLIX models: Choose different capacities or expansion packs to suit your power needs.
• Vehicle battery reverse charging requires an additional expansion port cable, sold separately.

The Anker SOLIX Alternator Charger lets you charge a compatible portable power station on the road via your vehicle's alternator or starter battery. Rather than slow charging through a standard 12V car socket, it delivers up to 800W of charging power. The charger is bidirectional, so it can also supply power back to support a weak vehicle battery when needed.

It works with 12V and 24V systems and supports lead acid (FLD, GEL, AGM, Calcium) and LiFePO4 (LFP) battery types. It is compatible with the Anker SOLIX C2000 Gen 2, C1000 Gen 2, C1000X and F3000 power stations. Safety protections include reverse polarity, overcurrent, short circuit, and over and undervoltage protection.

This setup is especially practical for camper van, van or work vehicle use. You charge while driving, arriving with a full energy buffer for your equipment. The reverse charging function lets the power station supply energy back through the Alternator Charger to recharge a depleted starter battery — useful after long periods of inactivity or heavy additional loads.

Operation is managed via the app, with automatic charging start, mode selection (charging or reverse charging), and remote management via Bluetooth or Wi-Fi.

Notes

1. C1000 Gen 1 and Gen 2 do not support the Alternator Charger via the expansion port, so they cannot support RV expansion and vehicle battery charging. C2000 Gen 2 and F3000 will support the Alternator Charger via the expansion port by Q1 2026.
2. More compatible portable power stations will be supported soon.
3. Not compatible with power stations operating below 34V on the XT-60 port. Vehicle battery reverse charging requires an additional expansion port cable, sold separately.