Alpine 6 Channel DSP Amplifier Subwoofer & Speakers for VW Crafter 2 MAN TGE
Couldn't Load Pickup availability
6-Channel DSP Amplifier, Subwoofer System & Speakers SPC-W84ACRA2-2 + SPC-106CRA2
for Volkswagen Crafter 2 / Grand California & MAN TGE
Upgrade your Alpine Adventure Audio speaker system for Volkswagen Crafter 2 / Grand California / MAN TGE to the Concert Ensemble with the new SPC-W84ACRA2-2 6-Channel DSP amplifier PDA-S560 and subwoofer system.
This sound upgrade will add lots of power output, dynamic and bass to your existing Alpine speaker system to achieve the ultimate listening experience in your vehicle.
The DSP amplifier is pre-programmed to perfectly match the sound characteristics of the Volkswagen Crafter 2 / Grand California, to ensure perfect sound quality, while the included wiring harness for original Volkswagen radios or aftermarket radios featuring RCA pre-amp outputs allows for fast plug-and-play installation in your vehicle.
The 180 Watt subwoofer comes pre-installed in a custom-fit wooden enclosure for installation under the passenger seat to add powerful bass to your existing sound system and is even compatible with the rotary seat of the Grand California camping van.
Enjoy the second generation of Alpine Status sound systems with an even more powerful amplifier.
Your VW Crafter 2 never sounded that good
Bring high-fidelity audio to your Volkswagen Crafter 2 at an affordable cost with the Alpine SPC-106CRA2 Adventure Audio speaker system. From deep, rich bass to accurate mids and crisp, clean highs – you will hear every note with a new sense of clarity. The speaker system handles up to 180 Watts peak power and provides an audiophile listening experience.
Upgrade to Concert Ensemble
If you have already installed an Alpine Adventure Audio speaker system in your Volkswagen Crafter 2 / Grand California, you can further upgrade your sound experience to the Concert Ensemble with the SPC-W84ACRA2-2 for even more dynamics, power and bass, as well as a better staging with digital time correction. Enjoy your favorite tunes with the unparalleled Adventure Audio listening experience.
- Volkswagen Crafter 2 Panel Van 2017 →
- Volkswagen Crafter 2 Minibus 2017 →
- Volkswagen Crafter 2 Grand California 2017 →
- MAN TGE 2017 →
More Power, More Dynamic
The 1120 Watt (peak power) Alpine DSP amplifier ads much more power and dynamic to your entire sound system and additionally drives the included 180 Watt dual-coil subwoofer. The DSP amplifier is pre-programmed to perfectly match the sound characteristics of the Volkswagen Crafter 2 / Grand California cabin, but can be further adjusted for steering wheel configurations (left or right), radio type and other factors.
Powerful Bass Upgrade
Enjoy strong, powerful bass in your Volkswagen Crafter 2 / Grand California & MAN TGE with this 180 Watt subwoofer and make all your audio tracks sound even more exciting. The dual-coil subwoofer comes pre-installed in a sealed wooden enclosure and is designed to be installed under the passenger’s seat of your vehicle. It is also compatible with the rotary seats of the Grand California version.
Fast & easy installation
All required installation brackets and cable harnesses are included in the SPC-W84ACRA2-2 kit to enable a smooth and easy installation. This version includes a plug-and-play wiring harness to connect the sound system to an original Volkswagen Crafter 2 / Grand California & MAN TGE radio or aftermarket radios featuring RCA pre-amp outputs.
Specification
| RMS Power Ratings CH 1-4 into 4 Ohms | 80W RMS x 4 (14.4V at 1% THD+N) |
|---|---|
| RMS Power Ratings CH 5-6 into 2 Ohms | 120W RMS x 2 (14.4V at 1% THD+N) |
| Power Requirement | 12 V |
| Measurements | 142mm x 40mm x 122mm (176mm with connectors plugged in) |
| Frequency response | 34Hz – 1.5kHz |
| Measurements | 315mm x 320mm x 170mm |
| Sensitivity | 91dB/W (1m) |
| Peak Power | 180 Watts |
| RMS Power | 60 Watts |
| Frequency response | 45Hz – 25kHz |
| Impedance | 4 Ohms |
| Sensitivity | 89dB 1W/W |
More specs
| |
What's Included
- SPC-W84ACRA2-2
- SPC-106CRA2 Speakers
- Included subwoofer grill
- Installation brackets
- Wiring Kit
- 6 Channel DSP Amplifier
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Alpine
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
