Shop All

JL Audio RD400/4 Full Range Class D 4 Channel Car Speaker Amp Amplifier 400w RMS

£309.00 Out of stock
Black Friday
Out of Stock
SKU: 91023MPN: RD400/4
Part of the range · 27 productsPart of the JL Audio Amplifiers range · 27 products See the range →

The JL Audio RD400/4 is an ultra-compact 4-channel, full-range Class D car amplifier delivering 100W x 4 at 2 ohms or 75W x 4 at 4 ohms (14.4V). It is part of JL Audio's RD Series and uses their proprietary NexD high-speed switching technology.

The RD Series is also available as the JL Audio RD500/1 monoblock subwoofer amplifier.

Key specifications

  • Channels: 4, Class D full-range (NexD switching technology)
  • RMS power at 14.4V: 75W x 4 at 4 ohms, 100W x 4 at 2 ohms
  • Bridged: 200W x 2 at 4 ohms
  • Frequency response: 12Hz – 22kHz (+0, -1dB)
  • Filters: high or low-pass 12dB/octave per channel pair, 50–500Hz, defeatable
  • Input voltage range: switchable 200mV – 2V RMS (low) to 800mV – 8V RMS (high)
  • Fuse rating: 40A; minimum power/ground wire 4 AWG

RD400/4: 4-channel Class D full-range amplifier, 400W

100W x 4 at 2 ohms / 75W x 4 at 4 ohms, 14.4V

Using JL Audio's exclusive NexD high-speed switching technology, the ultra-compact RD400/4 delivers high output power with excellent efficiency and low distortion. It produces 100W per channel into 2 ohms (14.4V, 1% THD) and is fully bridgeable — usable as a 3-channel amplifier or as a 2-channel amplifier producing 200W x 2 into 4 ohms.

Controls sit on top of the amplifier beneath a protective cover, with all connections along one side of the chassis. Signal processing includes high or low-pass 12dB/octave filters (defeatable) per channel pair, with continuously variable frequency selection from 50–500Hz. Dual-range, differential-balanced inputs accept most input voltage levels. Automatic turn-on (via signal sensing or DC-offset sensing) is standard, along with input type switches for bridging stereo output channels without Y-adaptors.

Onboard LED clipping indicators allow quick and accurate input sensitivity setting without special equipment. Preamp outputs let you pass signals to a further amplifier with ease. The RD400/4 has a durable black powder-coated finish and a top-mounted dual-colour LED strip that reports overall status and condition.

NexD switching technology

NexD amplifier technology delivers exceptional audio quality, high efficiency and high power from very compact designs.

JL Audio has been at the forefront of Class D amplifier design since the original Slash subwoofer amplifiers. NexD technology builds on that expertise to produce outstanding fidelity and efficiency, resulting in compact amplifiers that offer high power and strong value.

A traditional PWM switching amp uses a fixed switching frequency and varies pulse width based on the audio input signal. This assumes ideal conditions — such as a steady power supply — that don't always exist in a real car installation. Power supply sag causes distortion at all power levels, even well below clipping. Feedback can correct this, but becomes impractical at higher audio frequencies, making it suitable for subwoofer amps but not full-range amplifiers.

For NexD subwoofer amplifiers, JL Audio uses a fixed PWM approach enhanced with a very high switching frequency of 240kHz. This extends bandwidth to at least 500Hz with minimal distortion, improves efficiency, and keeps circuitry compact.

For full-range NexD amplifiers, JL Audio applies a variable, ultra-high-speed version of the technology, switching at well over 400kHz. A self-oscillating modulator with feed-forward feeds information about the instantaneous power supply voltage to the modulator, combining it with the input signal to cancel distortion caused by supply voltage fluctuation — reducing distortion before feedback is applied and simplifying the overall feedback loop.

The result is clean, powerful and reliable audio.

Specification
Frequency Response   12 Hz - 22 kHz (+0, -1dB)
More specs
  • @ 4 Ω    75 W RMS x 4
  • @ 2 Ω    100 W RMS x 4
  • Bridged @ 4Ω    200 W RMS x 2
  • S/N Ratio, referred to highest rated power    >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W    >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω    >150 / 50 Hz
  • Damping Factor @ 2 Ω    >75 / 50 Hz
  • THD+N @ Rated Power    <1% @ 2 Ω per Ch.
  • Input Voltage Range @ RCA Inputs    Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
  • Min.Copper Power / Ground Wire Gauge    4 AWG wire
  • Fuse Rating    40 A (AFS, AGU or MaxiFuse™)
What's Included
  • 4-Channel amplifier
  • 2.5mm Allen wrench
  • Self-adhesive JL Audio badge
  • Owner's manual
Product information

JL Audio

About the JL Audio RD400/4

From our tech experts at CEN

A 4-channel amplifier from JL Audio’s range, rated at 400w RMS.

Who it suits

Drivers whose speakers have outgrown the head unit, or who are building a front stage where each channel has a defined job.

Our tech experts advise

Matching the amplifier to the speakers matters more than headline watts, and the gains want setting with a meter rather than by ear. It also needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: How do I choose the right amplifier for my speakers or subwoofer?

A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.

Q: What wiring do I need to install this amplifier?

A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.

Q: What class of amplifier is this and does it matter?

A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.

Q: Will an amplifier work with my factory head unit?

A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.

Q: Can CEN install this amplifier?

A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.

Q: Can the JL Audio RD400/4 be bridged?

A: Yes. The RD400/4 is fully bridgeable. It can run as a 3-channel amplifier, or as a 2-channel amplifier producing 200W x 2 into 4 ohms. Input type switches allow bridging without Y-adaptors.

Q: How much power does the RD400/4 deliver per channel?

A: 75W RMS x 4 at 4 ohms and 100W RMS x 4 at 2 ohms, measured at 14.4V and 1% THD.

Q: Does the RD400/4 have built-in crossovers?

A: Yes. Each channel pair has a defeatable high or low-pass 12dB/octave filter with continuously variable frequency from 50 to 500Hz.