JBL Club A600 Amp 1 Channel Mono Class D Subwoofer Amplifier 600w RMS
Couldn't Load Pickup availability
The JBL Club A600 is a compact 1-channel mono Class D subwoofer amplifier from JBL's Club range, delivering 600W RMS at 2 ohms (350W RMS at 4 ohms).
Key specifications
- Channels: 1 (mono)
- Power: 350W RMS x 1 at 4 ohm, 600W RMS x 1 at 2 ohm
- Class: D
- Low-pass filter: 32 – 320 Hz, 12 dB/octave
- Bass boost: 0 – 12 dB at 45 Hz
- Inputs: preamp and speaker-level
- Fuses: 30A x 2
- Dimensions: 220 x 51.3 x 180 mm
High performance car amplifier
The Club A600 is a value-engineered amplifier that brings JBL power in a compact chassis designed to fit where space is tight. The Club range is available in 4-channel, 5-channel and mono models.
- Compact size
- High and low level input
- Variable crossover and bass boost
- Low noise and distortion
- Input level control
- Full on-board protection
- Phase switch
- RBC wired remote included
Variable crossovers and bass boost allow precise control and tuning. High and low level inputs let the amplifier integrate with most factory and aftermarket car stereos.
A wired remote bass level control is included and can be mounted for convenient adjustment from the driver's seat.
Explore the full range in JBL Club & Stadium.
Specification
| Series | Club |
|---|---|
| Article Number | CLUB A600 |
| Country of Manufacture | China |
More specs
| |
What's Included
- Club A600 mono subwoofer car amplifier
- 30A ATO fuses (2 installed, 2 spare)
- Bare wire-to-RCA adapters
- Remote bass control module
- 16.5' Remote control cable (RJ-25 plugs on both ends)
- Self-tapping screws for remote (M3 x 15mm)
- Mounting screws (M4 x 53mm)
- JBL stickers
- Owner's manual
JBL
About the JBL CLUB A600
From our tech experts at CEN
A monoblock subwoofer amplifier from JBL, rated at 600w RMS.
Who it suits
Anyone adding a subwoofer that needs more than a powered unit can give it.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full JBL range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JBL
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from JBL Club & Stadium
More options from the same range, in stock and ready to go
Save 18% JBL Club 1024 10 Inch 2 or 4 Ohm Car Subwoofer 250w RMS RRP£139.99£114.99 / Save 18%Low stock
Save 10% JBL Stadium 62CF 6.5 Inch 2 Way Component Car Door Speaker System 110w RMS RRP£399.99£359.99 / Save 10%Low stock
Save 17% JBL Stadium 62F 6.5 Inch 2 Way Coaxial Car Door Speakers 85w RMS Pair RRP£229.99£189.99 / Save 17%Low stock
Save 13% JBL Club A1000 Amp 1 Channel Mono Class D Subwoofer Amplifier 1000w RMS RRP£389.99£339.99 / Save 13%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How much power does the JBL Club A600 deliver?
A: It delivers 600W RMS x 1 at 2 ohms or 350W RMS x 1 at 4 ohms.
Q: Does the Club A600 include a bass remote?
A: Yes. A remote bass control module and 16.5 ft remote cable are included.
Q: What power cable does the Club A600 need?
A: JBL recommends 8-gauge power and ground leads. Wiring is not included with the amplifier.
