Hertz Mille Pro MPK 130.3 5 Inch 13cm Car 2 Way Component Speaker 100w RMS Pair

The Hertz Mille Pro MPK 130.3 is a 5-inch (130 mm) 2-way component speaker system rated at 100W RMS (200W peak) at 4 ohms, from Hertz's Mille Pro range. It pairs the MP 130.3 V-cone woofer with the MP 25.3 Tetolon dome tweeter and MPCX 2.3 passive crossover, designed to deliver wide low-frequency response even in vehicles with no space for a subwoofer.

Need a 6.5-inch set? See the MPK 165P.3 and the top of the range MPK 1650.3.

Key specifications

• Type: 5-inch (130 mm) 2-way component system
• Power handling: 100W RMS, 200W peak
• Impedance: 4 ohm
• Sensitivity: 91 dB SPL
• Frequency response: 60 Hz – 22.5 kHz
• Woofer: MP 130.3 V-cone, 25 mm voice coil
• Tweeter: MP 25.3, 29 mm Tetolon dome, 25 mm voice coil
• Crossover: MPCX 2.3 passive, 3.5 kHz, tweeter level 0 / +2 dB

Extreme dynamics, unlimited power handling, realistic sound stage

The MPK 130.3 is designed to deliver wide low-frequency response even in vehicles with no space for a subwoofer. V-cone® and Boundary Free Surround technologies give the MP 130.3 woofer strong dispersion and high SPL output in a compact size.

MP 25.3 tweeter

• Tetolon fibre soft dome for natural, detailed reproduction of musical nuances.
• "Centre Tuning Duct" geometry for lower resonance frequency and reduced harmonic distortion.
• High-density flux Neodymium magnet optimised for control during high-energy dynamic transients in the mid-high frequency range.
• 25 mm ferrofluid-cooled voice coil.
• Rear chamber filled with selected damping material, sized for lower Fs and a well-damped high-pass frequency roll-off, allowing a low cut-off frequency crossover point.
• FEM (Finite Element Modelling) optimised faceplate geometry for high linearity in off-axis installations.
• Wide range of installation accessories for easy OEM integration.

MP 130.3 woofer

• Pure copper voice coil wound on a Polyamide former for excellent power handling and fast transient response.
• Exponential V-cone® pressed-pulp cone with cotton fibres — stiff yet lightweight, with a profile geometrically optimised for linearity and dispersion in the mid-frequency range.
• "Boundary Free" rubber surround for improved efficiency and wider mid-bass frequency.
• High-density flux ferrite magnet with very low carbon content iron plates for low distortion at high power levels.
• Low mounting depth, acoustically transparent aluminium alloy basket with spider vent holes.
• Full-protection metal mesh grille with aluminium Hertz logo included; mineral powder-coated inner grille also supplied for multiple install combinations.

MPCX 2.3 crossover

• Two-position (0 / +2 dB) tweeter level switch for fine-tuning transducer output.
• 160V bi-metallised polyester film capacitors with ultra-low DF for maximum sound transparency and clean mid/high frequencies.
• 1 mm pure copper wire inductors with low series resistance for minimal dissipation losses on the woofer section.

The MPCX 2.3 crossover is designed to exploit the full extension of the MP 130.3 woofer, ensuring a natural transition to the MP 25.3 tweeter. The 1 mm low-parasitic-resistance copper filter coil maximises woofer efficiency. The tweeter level switch (0 / +2 dB) lets you calibrate the MP 25.3 output level relative to the woofer.