Edge Street Series EDS12D2-E3 Car Sub 2 Ohms 12 Inch Subwoofer 1600w RMS
Couldn't Load Pickup availability
The Edge EDS12D2-E3 is a 12 inch car subwoofer from the Edge Street Series, rated at 1600W RMS with dual 2 ohm voice coils and double stacked Y35 ferrite magnets.
Key specifications
- Model: EDS12D2-E3
- Size: 12 inch
- Impedance: dual 2 ohms
- Power handling: 1600W RMS, 3200W peak
- Magnets: dual Y35 ferrite, 170mm x 20mm, 120oz
- Cone: non pressed paper
- Surround: big roll foam, stitched
- Top plate / T-yoke: 10mm / 8mm bumped
- Mounting depth: 172mm, mounting diameter: 280mm
Edge Street Series 12 inch Subwoofer
The Street Series subs are designed from the ground up for musical bass. Double stacked magnets generate a large magnetic force to control the driver with pinpoint accuracy, while maintaining high excursion and SPL levels.
Polycotton spiders, a non-pressed paper cone and stitched tinsel leads keep the build quality high, delivering accurate, loud bass output.
Features
- Non pressed paper cone
- Wide roll foam surround
- Black polycotton spiders
- Dual Y35 ferrite magnets
- Black aluminium voice coil
Explore the full range in Edge Street Series.
Specification
| Cone | Non pressed paper |
|---|---|
| Surround | Big roll foam - stitched |
| Dustcap | Part IMPP |
| Voice Coil | 38mm Copper winding |
| Spider | 2pcs Black PC |
| Gasket | Rubber |
| Top Plate | 10mm Black anodized |
| T-Yoke | 8mm bumped |
| Terminal / Wire | Terminal |
| Impedance | Dual 2 Ohms |
| RMS Power | 1600 watts |
| Peak Power | 3200 watts |
| Magnet | Size 170mm x 20mm 2pcs |
| Magnet | Weight 120oz |
| Mounting Diameter | 11" (280mm) |
| Mounting Depth | 6.8" (172mm) |
What's Included
- EDS12D2-E3
Edge
About the Edge EDS12D2-E3
From our tech experts at CEN
An Edge 12 inch subwoofer, dual voice coil, 2 ohm, handling 1600w RMS.
Who it suits
Drivers building a system where the bass does real work, and SPL builds where output is the point.
Our tech experts advise
Enclosure volume and tuning decide most of what you hear, and the dual coils give you wiring options. Bigger output builds also need the electrical side checked, because large amplifiers pull current the standard charging system was never designed for. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Edge range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Edge
More options from the same range, in stock and ready to go
Staff Pick Edge SPL Sub 12 Inch Subwoofer Dual 2 Ohm Voice Coil 1500w RMS EDP122SPL-E3 £179.00 /In stock
Save 33% Best Seller Edge Street Series EDS10ADSP-E4 10 Inch Compact Active Bass Enclosure 300w RMS RRP£299.99£199.99 / Save 33%In stock
Save 6% Best Seller Edge 12 Inch Active Bass Box Sub Subwoofer Ported Enclosure EDB12A 300w RMS RRP£159.00£149.00 / Save 6%Low stock
Save 4% Edge DBX Series EDBX2200.1D-E4 Amp Class D 1 Channel Mono Amplifier 2200w RMS RRP£249.99£239.99 / Save 4%Low stock
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: What impedance is the EDS12D2-E3?
A: It has dual 2 ohm voice coils. Wired in parallel it presents a 1 ohm load, or wired in series a 4 ohm load, so match the wiring to what your amplifier is stable at.
Q: What is the mounting depth of the EDS12D2-E3?
A: The mounting depth is 6.8 inches (172mm) and the mounting diameter is 11 inches (280mm).
Q: What magnet does the EDS12D2-E3 use?
A: It uses two stacked Y35 ferrite magnets, each 170mm x 20mm, with a listed magnet weight of 120oz.
Q: How much power can the EDS12D2-E3 handle?
A: EDGE rates it at 1600W RMS and 3200W peak, so match it to an amplifier delivering around 1600W RMS at the wired impedance.
