


Dodo Mat DEAD-EZY Thermo Fleece Camper Insulation Slimline Van 10m Roll 3.7sq.m
Couldn't Load Pickup availability
Dodo Thermo Fleece
10m Coverage/Roll - 3.7sq.m 35mm Thickness Width 370mm
Thermo Fleece
DEAD-EZY ECOFILL by Dodo Mat is an itch-free sustainable 35mm insulation quilt manufactured from recycled plastic.
DEAD•EZY products have been carefully selected to offer value for money and cover the key aspects of van building, while being easy to install and maintaining the UK quality control you have come to expect from Dodo Mat.
ECOFILL offers a safe, sustainable and cost effective way to insulate your camper van. It contains 100% recycled polyester and is made almost entirely from recycled plastic. It is suitable for all vehicle applications, is non-irritant and requires no protective clothing when installing. It will not absorb moisture in high humidity conditions and does not support mould growth.
ECOFILL can be cut using a straight edge and a Stanley knife, or simply torn apart.
DEAD-EZY ECOFILL is long-lasting and safe to handle. It can be used to insulate between campervan panels or simply laid on top of existing van insulation to improve overall insulation performance.
For best performance use on top of a Dodo Thermo Liner base layer.
Typical uses of this product:
- Install in camper van panels to improve overall insulation performance.
- Safe, sustainable and cost effective way to insulate your vehicle or home.
- Can be used to reduce airborne sound.
Specification
| Performance | Thermal Conductivity: 0.048W/mK |
|---|---|
| Water Absorption | (@100% RH): 0% w/w |
| Ignition Point | >500oC |
| Conforms to BS1425 | Part1:1991 Cleanliness of fillings & stuffings |
| Composition | 100% recycled polyester, >95% recycled content |
More specs
| |
What's Included
- 1x 10m Roll Dodo Fleece
About the brand
Dodo Mat
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Frequently Asked Questions
Q: How much sound deadening do I need for my car?
A: As a guide, a pair of front doors takes around 1 to 1.5 square metres, and a full car between 4 and 6 square metres depending on coverage. The sheet coverage for this product is listed in the Specification tab.
Q: Where should I apply sound deadening first?
A: Doors give the biggest gain for both road noise and speaker performance, followed by the boot floor and wheel arches. Even a doors-only install noticeably tightens speaker bass.
Q: Is sound deadening difficult to fit myself?
A: It is one of the more DIY-friendly upgrades: panels are cut to shape, peeled and rolled firmly onto clean metal. A roller tool and panel removal tools make the job much easier, or CEN can carry out installation from our Nottingham premises.
Q: Will sound deadening improve my audio system?
A: Yes. Deadening the doors reduces panel resonance so speakers produce cleaner, tighter bass, and lowering road noise means you hear more detail at normal volumes.

































