Shop All

Audison Prima AP 1P Tweeter Component 1" 29mm Neodymium REN Magnet 150w Peak

£119.99
In stock
SKU: 90183MPN: AP 1P

The Audison Prima AP 1P is a 1" (29 mm) Teloton fibre dome tweeter from the Audison Prima range, handling 150 W peak power at 8 ohms, built around a double neodymium magnet and Audison's AIF (Any Install Faceplate) system.

Key specifications

  • Size: 29 mm (1")
  • Dome material: Teloton fibre
  • Magnet: Double neodymium
  • Power handling: 150 W peak (hi-pass filtered at 2.5 kHz, 12 dB/oct)
  • Impedance: 8 ohms
  • Frequency response: 1.2 kHz to 25 kHz
  • Sensitivity: 92 dB
  • Voice coil: 25 mm (1 in) CCAW
  • Crossover: APCX P 2T, high pass 12 dB/oct, tweeter level 0 / +3 dB

Audison Prima

Audison Prima is designed for enthusiasts who want to hear every nuance of their music through components that integrate cleanly with a car's OEM system — without compromising on space.

The AIF (Any Install Faceplate) system gives the installer three different faceplates, reducing installation time and covering virtually any fitment scenario. Four mounting accessories are included to handle any installation type, and the tweeter is designed to run with the APCX P 2T high-pass crossover. Pair it with the Audison Prima AP 6.5 midbass woofer for a full Prima component system.

  • AIF technology provides three faceplates for total application versatility.
  • Four mounting accessories supplied to suit any installation type.
  • Double neodymium magnet for excellent high-frequency extension.
  • 1 in. CCAW voice coil for superior dynamic response.
  • Dome profile optimised with FEM simulations for wide off-axis dispersion.

The three AIF faceplates are:

  • OEM: for easy, correct factory placement
  • Mesh grille: best compromise between protection and performance for A-pillar installations
  • Spoke grille: maximum acoustic performance for A-pillar installations

The four included mounting accessories are:

  • Watch band
  • Double-angle cup
  • Flush mounting ring
  • Metal mounting spring
Specification
Power Handling- Peak    150 W
Power HandlingCrossover    Hi-pass filtered @2.5 kHz 12dB/oct
Impedance   8 Ohm
Frequency Response   1,2 ÷ 25k Hz
Crossover adjustment    Tweeter Level0 / +3 dB
MagnetMaterial    NEODYMIUM
Voice CoilØ    25 mm
Weight   0.067 kg
More specs
  • Crossover name    APCX P 2T
  • Crossover Type    High Pass 12 dB/oct.
  • Crossover point    4 kHz
  • Woofer Qes    1.74
  • Dome Material    TELOTON FIBRE
  • D    29 mm
  • Re    5.75 Ohm
  • Fs    1600 Hz
  • Mms    0.23 g
  • Cms    0.05 mm/N
  • BL    2.7 T•m
  • Qms    4
  • Qts    1.21
  • Le Standard    0.04 mH
  • Spl    92 dB
  • Crossover Weight    0.065 kg
What's Included
  • Audison Prima AP 1P Tweeter
  • Watch band
  • Double-angle cup
  • Flush Mounting Ring
  • Metal mounting spring
Product information

Audison

About the Audison AP 1P

From our tech experts at CEN

Audison Prima tweeters, 1 inch.

Who it suits

Drivers building a front stage where the tweeter needs to sit higher than the door, and anyone replacing a damaged tweeter from an Audison set.

Our tech experts advise

Placement and aiming change the result more than the tweeter does, and they must be crossed over so they never play too low. get in touch. See car audio installation.

Explore the full Audison range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Audison

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Audison News & Guides

The latest Audison product news, launches and guides from the CEN team in Nottingham.

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Elettromedia Brands

Evolution of technology and art of sound

Frequently Asked Questions

Q: What size is the Audison AP 1P tweeter?

A: The AP 1P has a 29 mm Teloton fibre dome with a 25 mm (1 inch) CCAW voice coil.

Q: What impedance is the AP 1P?

A: The AP 1P is an 8 ohm tweeter, with 150 W peak power handling when high-pass filtered at 2.5 kHz, 12 dB/oct.

Q: What mounting options does the AP 1P have?

A: It has three interchangeable faceplates (OEM, mesh grille and spoke grille) plus four mounting accessories: a watch band, double-angle cup, flush mounting ring and metal mounting spring.

Q: Can CEN fit these tweeters for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.