



QED Performance QE7711 Subwoofer Cable Interconnect RCA 3m
Couldn't Load Pickup availability
QED Performance Subwoofer Cable 3m
Adding a subwoofer should make a system sound bigger, deeper and more immersive. It shouldn't introduce hum, noise or another round of second-guessing.
Performance Subwoofer is designed to make the connection between your amplifier and active subwoofer simple, reliable and engineered for musical accuracy.
Built around QED's proven Solid Complementary Conductor™ Technology, it helps preserve signal timing and integrity while advanced shielding technology protects delicate low-frequency signals from the electrical noise found in modern homes.
Whether you're adding a subwoofer to a stereo system, expanding a home cinema setup or finally giving your speakers the low-frequency support they deserve, Performance Subwoofer gives you the confidence that this vital connection is properly taken care of.
Features
- Solid Complementary Conductor™ Technology for improved signal timing and accuracy
- Ferrite Insulation Technology™ helps protect against RF and digital interference
- Dual electrostatic screening for enhanced noise rejection
- 99.999% oxygen-free copper conductors
- Foamed polyethylene dielectric for a low-loss signal path
- Ultra-flexible TPE jacket for easy installation
- Gold-plated QED phono connectors for long-term reliability
Explore the full range in Subwoofer Cables.
Specification
| Conductor Material | Solid Enamelled 99.999% Oxygen-Free Copper |
|---|---|
| Conductor Construction | (1 × 1/0.511 + 1 × 1/0.254) [24 AWG] |
| Screening Material | Ferrite Jacket, Aluminium Mylar Wrap and 100% Shield Braid |
| Dielectric | Foamed Polyethylene |
| Loop Resistance | 0.081 Ω/m |
| Parallel Capacitance | 66 pF/m |
| Loop Inductance | 0.38 μH/m |
| Dissipation Factor | 0.0124 @10kHz |
| Characteristic Impedance | 75 Ω |
| Outside Diameter | 6 mm |
| Jacket Finish | Cool Grey TPE |
What's Included
- QED Performance Subwoofer Interconnect Cable 3m
QED
About the QED QE7711
From our tech experts at CEN
The QED Performance QE7711 is a 3m RCA subwoofer interconnect for connecting an AV receiver or amplifier to a powered subwoofer. It uses Solid Complementary Conductors, a ferrite impregnated absorption layer to keep digital noise out, a foamed polyethylene dielectric and gold-plated QED phono plugs.
Who it suits
The 3m length suits a subwoofer placed near the front of the room, beside the TV unit or a front speaker, with the receiver close by. If the sub sits in a corner or along a side wall, the 6m QE7714 gives the extra reach.
Our tech experts advise
Connect it from the receiver's SUB or LFE output to the subwoofer's line or LFE input. Measure along the actual cable route around the room before choosing a length. Keep the cable away from mains leads to avoid hum, and do not coil spare cable tightly. For more QED cables, see our QED collection.
Explore the full QED range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all QED
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Frequently Asked Questions
Q: What is the QED QE7711 used for?
A: It is a 3m RCA subwoofer cable for connecting the subwoofer output of an amplifier or AV receiver to a subwoofer.
Q: What lengths does the QED Performance Subwoofer Interconnect come in?
A: CEN lists it in 3m (QE7711), 6m (QE7714) and 10m (QE7717) lengths.
Q: How does the QED QE7711 reduce noise?
A: A ferrite impregnated absorption layer protects the analogue signal from digital noise pollution, and the ultra-flexible TPE jacket increases immunity to microphonic handling noise.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →Shop Popular Category
Picks Across Home Audio, Outdoor and Photography




























