

Q Acoustics Concept 50 Floorstanding Speakers Concept Series White QA2954
Couldn't Load Pickup availability
The Q Acoustics Concept 50 (QA2954) is a pair of 2-way floorstanding speakers from Q Acoustics' Concept Series, featuring twin 125 mm mid/bass drivers, a 25 mm tweeter, and bass extension down to 42 Hz in a White finish.
The Concept 50 builds on the Concept 30 standmount with more power, a deeper soundstage, and extra bass from its low-resonance floorstanding cabinet.
Key specifications
- Type: 2-way floorstanding speakers (pair)
- Finish: White (QA2954)
- Bass units: 2 x 125 mm (5.0 in)
- Treble unit: 1 x 25 mm (1.0 in)
- Frequency response (-6 dB): 42 Hz – 30 kHz
- Nominal impedance: 6 Ω (minimum 3.6 Ω)
- Sensitivity (2.83 V @ 1 kHz): 90.5 dB
- Recommended amplifier power: 25–150 W
- Crossover frequency: 2.1 kHz
- Effective volume: 28.8 L
- Dimensions (HxWxD, each, inc. spikes and stabiliser): 1025 x 418 x 319 mm (cabinet width 180 mm)
- Weight (each): 22.9 kg
Concept engineering
Concept models use Gelcore cabinet construction to absorb higher-frequency vibration and P2P (Point to Point) bracing to stiffen the walls against lower frequencies. Drivers sit on an isolation suspension base, and an aluminium front baffle is fixed with pre-tensioned studs. The hermetically sealed tweeter floats free of the baffle for clean, detailed treble.
HPE pressure equalisers
HPE (Helmholtz Pressure Equalizer) tubes reduce internal pressure and standing waves inside the tall cabinet. Both ball-end and spike feet are supplied.
Explore the full range in Floorstanding Speakers.
Specification
| Type | 2-way floorstanding speakers (pair) |
|---|---|
| Bass units | 2 x 125 mm (5.0 in) |
| Treble unit | 1 x 25 mm (1.0 in) |
| Frequency response | (-6 dB) 42 Hz – 30 kHz |
| Nominal impedance | 6 Ω (minimum 3.6 Ω) |
| Sensitivity | (2.83 V @ 1 kHz) 90.5 dB |
| Recommended amplifier power | 25–150 W |
| Crossover frequency | 2.1 kHz |
| Effective volume | 28.8 L |
| Dimensions | (HxWxD, each, inc. spikes and stabiliser) 1025 x 418 x 319 mm (cabinet width 180 mm) |
| Weight | (each) 22.9 kg |
What's Included
- 2 x Concept 50 speakers
- 2 x Speaker grilles
- 2 x Foam bungs
- 1 x Owner's manual
- 10 x Ball-end feet
- 10 x Spike feet
- 8 x M4 screws
- 2 x Support bases
Q Acoustics
About the Q Acoustics QA2954
From our tech experts at CEN
The Q Acoustics Concept 50 (QA2954) is a pair of 2-way floorstanding speakers finished in White. Twin 125 mm mid/bass drivers and a 25 mm hermetically sealed tweeter cover 42 Hz to 30 kHz, with 90.5 dB sensitivity and a 6 Ω nominal impedance. Gelcore cabinet construction and P2P bracing control vibration throughout the range.
Who it suits
The Concept 50 is aimed at serious hi-fi and home cinema listeners with a medium to large room. With 90.5 dB sensitivity and 25–150 W power handling, it suits a broad range of amplifiers. Those looking for a step down could consider the Q Acoustics 3050c in Satin White.
Our tech experts advise
Each cabinet stands 1025 mm tall and weighs 22.9 kg, so plan for two people when positioning them. Both ball-end and spike feet are supplied: use spikes on carpet and ball-end feet on hard floors. Check your amplifier can handle a minimum impedance of 3.6 Ω. See the full Q Acoustics range for comparison.
Explore the full Q Acoustics range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Q Acoustics
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Frequently Asked Questions
Q: What amplifier power do the Q Acoustics Concept 50 require?
A: The Q Acoustics Concept 50 have a recommended amplifier power of 25–150 W and a nominal impedance of 6 Ω (minimum 3.6 Ω), making them compatible with a broad range of stereo amplifiers.
Q: Are the Q Acoustics Concept 50 sold as a pair or as a single speaker?
A: The Q Acoustics Concept 50 (QA2954, White) are supplied as a pair, with each speaker measuring 1025 x 418 x 319 mm (H x W x D, including spikes and stabiliser) and weighing 22.9 kg.
Q: What is included in the box with the Q Acoustics Concept 50?
A: The Q Acoustics Concept 50 package contains two speakers, two speaker grilles, two foam bungs, two support bases, ten ball-end feet, ten spike feet, eight M4 screws, and an owner's manual.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Home Audio
Portable CD Players Are Back: FiiO DM13, Shanling EC Play and More
Read the guide →
Home Audio
Hi-Fi Christmas Gift Guide: Presents for People Who Love Music
Read the guide →
Home Audio
What Is a DAC, and Do You Actually Need One?
Read the guide →
Home Audio
New at CEN: FiiO M21 — Serious Portable Hi-Res for £329
Read more →Shop Popular Category
Picks Across Home Audio, Outdoor and Photography




























