

Q Acoustics Concept 50 Floorstanding Speakers Concept Series Black QA2950
Couldn't Load Pickup availability
The Q Acoustics Concept 50 (QA2950) is a pair of 2-way floorstanding speakers from Q Acoustics' Concept Series, featuring twin 125 mm mid/bass drivers, a 25 mm tweeter and a frequency response down to 42 Hz.
The Concept 50 builds on the Concept 30 standmount with a low-resonance floorstanding cabinet, delivering more power, a deeper soundstage and extended bass.
Key specifications
- Type: 2-way floorstanding speakers (pair)
- Finish: Black (QA2950)
- Bass units: 2 × 125 mm (5.0 in)
- Treble unit: 1 × 25 mm (1.0 in)
- Frequency response (−6 dB): 42 Hz – 30 kHz
- Nominal impedance: 6 Ω (minimum 3.6 Ω)
- Sensitivity (2.83 V @ 1 kHz): 90.5 dB
- Recommended amplifier power: 25–150 W
- Crossover frequency: 2.1 kHz
- Effective volume: 28.8 L
- Dimensions (H×W×D, each, inc. spikes and stabiliser): 1025 × 418 × 319 mm (cabinet width 180 mm)
- Weight (each): 22.9 kg
Concept engineering
Concept models use Gelcore cabinet construction to absorb higher-frequency vibration and P2P (Point to Point) bracing to stiffen the walls against lower frequencies. The drivers sit on an isolation suspension base, with an aluminium front baffle fixed using pre-tensioned studs. The hermetically sealed tweeter floats free of the baffle for clean, detailed treble.
HPE pressure equalisers
HPE (Helmholtz Pressure Equalizer) tubes reduce internal pressure and standing waves in the tall cabinet. Both ball-end and spike feet are supplied.
Explore the full range in Floorstanding Speakers.
Specification
| Type | 2-way floorstanding speakers (pair) |
|---|---|
| Bass units | 2 x 125 mm (5.0 in) |
| Treble unit | 1 x 25 mm (1.0 in) |
| Frequency response | (-6 dB) 42 Hz – 30 kHz |
| Nominal impedance | 6 Ω (minimum 3.6 Ω) |
| Sensitivity | (2.83 V @ 1 kHz) 90.5 dB |
| Recommended amplifier power | 25–150 W |
| Crossover frequency | 2.1 kHz |
| Effective volume | 28.8 L |
| Dimensions | (HxWxD, each, inc. spikes and stabiliser) 1025 x 418 x 319 mm (cabinet width 180 mm) |
| Weight | (each) 22.9 kg |
What's Included
- 2 x Concept 50 speakers
- 2 x Speaker grilles
- 2 x Foam bungs
- 1 x Owner's manual
- 10 x Ball-end feet
- 10 x Spike feet
- 8 x M4 screws
- 2 x Support bases
Q Acoustics
About the Q Acoustics QA2950
From our tech experts at CEN
The Q Acoustics Concept 50 (QA2950) is a pair of high-end 2-way floorstanding speakers in Black, each with twin 125 mm mid/bass drivers and a 25 mm hermetically sealed tweeter. Frequency response extends down to 42 Hz. The cabinet uses Gelcore construction, P2P internal bracing and HPE pressure equaliser tubes to control resonance.
Who it suits
The Concept 50 suits serious hi-fi listeners who want deep, controlled bass in a medium to large room without a separate subwoofer. Each speaker stands 1025 mm tall and weighs 22.9 kg, so they need a permanent, stable position. For a step down in the range, the Q Acoustics 3050c is worth considering.
Our tech experts advise
Match the Concept 50 with an amplifier delivering 25–150 W; the nominal impedance is 6 Ω but dips to 3.6 Ω, so confirm your amplifier handles that. Spike feet suit carpet; ball-end feet suit hard floors — both are supplied. Foam bungs are included to reduce bass output if the speakers sit close to a rear wall. See the full Q Acoustics range for other models.
Explore the full Q Acoustics range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Q Acoustics
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Frequently Asked Questions
Q: What amplifier power do the Q Acoustics Concept 50 require?
A: The Q Acoustics Concept 50 has a nominal impedance of 6 Ω (minimum 3.6 Ω) and a sensitivity of 90.5 dB, and is designed for use with an amplifier rated between 25 and 150 W.
Q: How large and heavy is each Q Acoustics Concept 50 speaker?
A: Each Q Acoustics Concept 50 measures 1025 x 418 x 319 mm (H x W x D, including spikes and stabiliser, with a cabinet width of 180 mm) and weighs 22.9 kg.
Q: What is included in the box with the Q Acoustics Concept 50?
A: The Q Acoustics Concept 50 is supplied as a pair and includes two speaker grilles, two foam bungs, ten ball-end feet, ten spike feet, eight M4 screws, two support bases, and an owner's manual.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Home Audio
Portable CD Players Are Back: FiiO DM13, Shanling EC Play and More
Read the guide →
Home Audio
Hi-Fi Christmas Gift Guide: Presents for People Who Love Music
Read the guide →
Home Audio
What Is a DAC, and Do You Actually Need One?
Read the guide →
Home Audio
New at CEN: FiiO M21 — Serious Portable Hi-Res for £329
Read more →Shop Popular Category
Picks Across Home Audio, Outdoor and Photography




























