Shop All

JL Audio CLS113RG-W7AE Subwoofer 13" W7 ProWedge Sealed Sub Enclosure 1500w RMS

£1,869.00 Factory Order
Factory Order
SKU: 90984MPN: CLS113RG-W7AE
Ordered in especially for you, Special Order T&C's apply.
Part of the range · 18 productsPart of the JL Audio Enclosures range · 18 products See the range →

The JL Audio CLS113RG-W7AE is a sealed ProWedge subwoofer enclosure loaded with a single 13W7AE-D1.5 driver, rated at 1500W RMS and wired to a 3 ohm system impedance. Part of JL Audio's W7AE range, its angled-back design sits tight against a rear seat for a compact, high-performance sub-bass installation.

Key specifications

  • Driver: single 13W7AE-D1.5 (dual 1.5 ohm voice coils)
  • Power handling: 1500W RMS; recommended amplifier power 500W–1500W
  • System impedance: 3 ohms
  • Enclosure type: sealed ProWedge
  • Construction: CNC-cut high-grade MDF
  • Dimensions: 572mm wide × 464mm high × 464mm deep (292mm top surface depth)
  • Grille: aluminium bar grille included
  • Connection: five-way binding post terminal
  • Net weight: 46.79kg

Sealed ProWedge enclosure tuned for the 13W7AE-D1.5

This sealed ProWedge system is engineered to the optimum sealed alignment for the 13W7AE-D1.5 driver and fine-tuned through extensive real-world listening. It delivers extension, impact, detail and smooth response at any listening level.

The system ships wired, loaded and ready to connect via the five-way binding post terminal.

The angled-back design saves cargo space by allowing the enclosure to sit flush against the back of the vehicle's rear seat.

Finish and construction

Finished in black high-grade automotive carpet with a gloss-black laminated decorative front baffle trim. Three solid aluminium bars provide stylish, rugged woofer protection. The enclosure is CNC-cut from high-grade MDF.

Impedance and amplifier matching

The 13W7AE-D1.5 driver features dual 1.5 ohm voice coils, wired for a nominal 3 ohm system load. Recommended amplifier power is 500W to 1500W RMS.

Specification
Size13 Inch
RMS Power1000W
ShapeSquare
Voice CoilDual
TypePassive Enclosure
SeriesProWedge
Article NumberCLS113RG-W7AE
Country of ManufactureChina
More specs
  • Continuous Power Handling (RMS)    1500 W
  • System Nominal Impedance    3 Ω
  • Enclosure Type    Sealed, rear-firing design
  • Finish    Black carpet / laminate
  • Grille Included    Aluminum Bar Grille
  • External Width (W)    22.5 in / 572 mm
  • External Height (H)    18.25 in / 464 mm
  • External Depth (D1)    18.25 in / 464 mm
  • External Top Surface Depth (D2)    11.50 in / 292 mm
  • Net Weight    103.2 lb / 46.79 kg
What's Included
  • CLS113RG-W7AE
  • Warranty information
Product information

JL Audio

About the JL Audio CLS113RG-W7AE

From our tech experts at CEN

A JL Audio 13 inch W7AE subwoofer supplied in a ProWedge sealed enclosure, handling 1500w RMS. The box is built to the driver’s specification rather than to fit a shelf.

Who it suits

Drivers who want the result without commissioning a custom build. Sealed enclosures give tighter, more accurate bass and take less room, which suits music where timing matters more than sheer output.

Our tech experts advise

Match the amplifier to the enclosure’s rating rather than the driver’s headline figure, and secure the box properly: an unrestrained enclosure is dangerous in a crash. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Q: Is the CLS113RG-W7AE ready to connect?

A: Yes. It is shipped wired and loaded with the 13W7AE-D1.5 driver, ready to connect to your amplifier via a five-way binding post terminal.

Q: What impedance does the CLS113RG-W7AE present to the amplifier?

A: The system is wired to a nominal 3 ohms. Choose a mono amplifier that delivers between 500W and 1500W RMS into that load.

Q: How big is the CLS113RG-W7AE?

A: It measures 572mm wide, 464mm high and 464mm deep, with a 292mm top surface depth thanks to the angled back, and weighs 46.79kg.