Shop All

Match UP W8BMW-S 2ohm BMW 1, 2, 3, 4, 5 X Series 8 Inch Underseat Subwoofers

RRP £299.99 £239.99 Save 20% Out of stock
Out of Stock
SKU: 91161MPN: UP W8BMW-S

MATCH UP W8BMW-S 2ohm

Approved compatibility with BMW Models

Premium cars deserve premium sound – the basic speaker setup in BMW vehicles does not meet the expectations of ambitious music lovers in many cases

MATCH UP W8BMW-S

Maximum POWER for BMW sound concepts

The ultra-flat UP W8BMW-S subwoofers are playing extremely dynamically and punchy. Especially the exceptionally rigid fiberglass cone generates maximum sound pressure without distortions.

The BMW-specific baskets and connectors allow fast and easy installation into the original mounting positions of all BMW model ranges with under-seat subwoofers.

Nevertheless these subwoofers are also perfectly qualified for universal applications. Thanks to the very low mounting depth, extremely compact sealed enclosures are no problem at all whereas the oversized 1.7” / 42.5 mm voice coil assures high power handling. With their 1 x 2 Ohms single voice coil the UP W8BMW-S are the perfect replacement for the original subwoofers of the BMW HiFi sound system. Additionally they are the perfect playmate for our MATCH Upgrade amplifier MATCH UP 7BMW and MATCH UP 7DSP.

No matter if these subwoofers are used for a bass upgrade in your BMW or as supplier of low-frequencies in universal concepts, they will definitely add loads of powerful bass for musical enjoyment.

Features

  • 2 x 8” BMW upgrade subwoofer
  • Fits perfectly into the original mounting positions under the front seats of all BMW model ranges with under-seat subwoofers
  • Extremely stiff fiberglass cone for maximum sound pressure
  • 1 x 2 Ohms impedance per woofer
  • Oversized 42.5 mm / 1.7” voice coil for high power handling
  • BMW connection cables for original BMW cable harness are included in delivery
  • Perfectly combinable with the MATCH UPGRADE amplifiers MATCH UP 7BMW and UP 7DSP
  • Also ideal for universal use in ultra-flat subwoofer constructions
Specification
Impedance    Z    1 x 2 Ω
Conearea     Sd    214 cm²
Conematerial         Extremely stiff fiberglass cone
Voice coildiameter    ø    42.5 mm
Voice coilwinding height         12.5 mm
More specs
  • Power RMS / max.    P    200 / 400 Watts
  • DC resistance     Re    2.0 Ω
  • Resonance frequency     Fs    49 Hz
  • Mechanical Q factor     Qms    3.80
  • Electrical Q factor     Qes    0.61
  • Total Q factor    Qts    0.53
  • Compliance    Cms    210 µm/N
  • Equivalent air volume    Vas    13.9 L
  • Force factor     B*I    7.1 Tm
  • Efficiency 1 W / 1 m    SPL    90 dB
  • Moving mass     Mms    47.4 g
  • Mechanical resistance     Rms    3.97 kg/s
  • Max. linear excursion     Xmax    +/- 4.0 mm
  • Outer diameter    ø    239 mm / 9.41"
  • Installation diameter    ø    175 mm / 6.89"
  • Installation depth         40 mm / 1.57"
What's Included
  • 2 x Subwoofer MATCH UP W8BMW-S
  • 2 x BMW connection cable
  • 1 x Mounting material
  • 1 x Instruction manual
FAQs
Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Product information

About the brand

Match

At the core of Match Electronics’ success is its unwavering focus on innovation. The company invests heavily in research and development to stay ahead of technological advancements. Their R&D teams work on pioneering technologies such as artificial intelligence, Internet of Things (IoT), and 5G, integrating these into their products to offer cutting-edge solutions to their customers.

Looking forward, Match Electronics aims to continue its trajectory of growth by expanding its product lines and exploring new markets. They are poised to leverage emerging technologies and trends to offer innovative solutions that address future needs. With a strong foundation of quality, innovation, and customer-centricity, Match Electronics is well-positioned to be a leader in the electronics industry for years to come.

Shop Match

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Audiotec Fischer Brands

High-End Car Hifi components from Audiotec Fischer

Reviews

No reviews yet — be the first to review this product.

Write a review