Shop All

ESB 9.1T-25 Novemila Series 1 Inch High End Silk Dome Tweeter 100w RMS Pair

£649.00
Low stock
SKU: 92982MPN: 9.1T-25

9.1T-25

1"/25 mm High-End Dome Tweeter

Silk dome impregnated with resin with integrated suspension. This dome is made in a single piece that also includes the suspension. This greatly reduces weight allowing the tweeter to reproduce very high frequencies. The absence of joints prevents break-up and/or vibration phenomena.

Magnet made from N52H neodymium, best both for the magnetic force in relation to the mass, and for high temperature support (120° F vs. 80° F of a standard neodymium magnet).

The pole cup has twelve axial holes in the bottom to eliminate the air back pressure caused by the movement of the dome. This solution helps to reduce the distortion that would inevitably be generated due to the deformation of the delicate silk dome, and also helps to reduce the tweeter frequency resonance.

The back of the tweeter includes a threaded hole that greatly increases the installation possibilities in unconventional locations inside cars. Wide 25 mm lightweight aluminum voice coil with aluminum copper clad winding contributes significantly to the large bandwidth extension of this tweeter. Magnet plate made of ultra-low-carbon steel. Main body made in ABS.

The connecting cables are super flexible with high silver content to reduce electrical connection losses. Gold-plated copper terminals. Felt damper for controlling and reducing dome resonance. Light stainless steel grill for dome protection.

    Specification
    Nominal Impedance4 Ohm
    Nominal Power Handling100 Watt
    Transient Power200 Watt
    Frequency Response1.6 KHz ~ 25 KHz
    Sensitivity91.5 dB 2.83v/1m
    What's Included
    • ESB 9.1T-25
    Product information

    ESB Audio

    About the ESB Audio 9.1T-25

    From our tech experts at CEN

    ESB tweeters, 1 inch, handling 100w RMS, a dome design.

    Who it suits

    Drivers building or repairing a front stage where the tweeter needs mounting on the pillar or dash rather than down in the door.

    Our tech experts advise

    Placement and aiming change the result more than the tweeter does, and they must be crossed over so they are never asked to play too low. get in touch. See car audio installation.

    Explore the full ESB Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all ESB Audio

    Looking for Installation?

    At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

    Get a quote

    Frequently Asked Questions

    Q: Will these speakers fit my car?

    A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

    Q: Do I need an amplifier to run these speakers?

    A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

    Q: What is the difference between coaxial and component speakers?

    A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

    Q: Do these come as a pair?

    A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

    Q: Can CEN fit these speakers for me?

    A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.