Shop All

Kicker 48PXA10005 5 Channel Waterproof Amplifier 1000w RMS

£899.95 Out of stock Factory Order
Factory Order
SKU: 93628MPN: 48PXA10005
Ordered in especially for you, Special Order T&C's apply.

PX 1000W 5 Channel Class D Waterproof System Amplifier

48PXA10005

Mount PXA-Series Amplifiers in any type of watercraft, space challenged vehicles, classic cars, or any type of vehicle that needs minimum strain put on the charging system.

Anywhere. Any Weather.

The entire PXA line is completely waterproof, featuring sealed bulkhead grommeting, gasketed joints and a sealed preamp control door, earning both IP66 and IP67 certifications* for power and fun wherever you go!

What is IP66 and IP67?

IP66 certification means PXAs are protected against heavy seas or powerful jets of water. IP67 certification allows no dust into the amplifier, as well as no moisture when submerged in one meter of water for 30 minutes. The certifications do not apply to the wire couplers.

Got The Goods

Made for all environments, PXA Amplifiers include no-rust, stainless-steel mounting hardware and a pair of shielded, in-line couplers to extend power and ground with no soldering or crimping.

  • Waterproof amplifier design with IP66 and IP67 certifications
  • Ideal for watercraft, off-road vehicles, or space-challenged vehicles
  • High-efficiency Class-D technology
  • Huge power from a small footprint – rated at 800 watts Dynamic Power!
  • Dual turn-on modes (choice of DC offset or 12v trigger)
  • Includes inline power and ground couplers that need no soldering or crimping
  • Stainless-steel mounting hardware included
Specification
RMS Power @ 14.4V100W x 4 @ 4Ω / 100W x 4 @ 2Ω / 500W x 1 @ 2Ω Sub Channel / 600W x 1 @ 1Ω Sub Channel
Output Channels5
Voltage (V)12
ClassD
Fuse Rating (A)150
Amp Turn-On+12V Remote / DC Offset
ControllerCXARC (Sold Separately)
Bass Boostselectable 0/+6dB, centered at 40Hz (sub channel only)
Crossovers24dB/octave hi-pass 80/120Hz (amp1 and amp2); lo-pass 60/80/100/120Hz (sub only)
Input TypeHigh & Low Level
Height (cm)5.0
Width (cm)32.8
Depth (cm)11.5
More specs
  • Subsonic – 25Hz, 24dB/octave (sub only)
What's Included
  • Kicker 48PXA10005
Product information

Kicker

About the Kicker 48PXA10005

From our tech experts at CEN

A 5-channel amplifier, rated at 1000w RMS. Enough channels for a front and rear stage, or a front stage with the remaining channels bridged onto a sub.

Who it suits

Drivers who have upgraded their speakers and found the head unit cannot drive them. This is the step that makes good speakers sound like good speakers.

Our tech experts advise

Published power figures mean little until the amplifier is matched to the speakers and the gains are set with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge, the part we most often see done badly. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: How do I choose the right amplifier for my speakers or subwoofer?

A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.

Q: What wiring do I need to install this amplifier?

A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.

Q: What class of amplifier is this and does it matter?

A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.

Q: Will an amplifier work with my factory head unit?

A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.

Q: Can CEN install this amplifier?

A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.