Option Audio VW T6.1 Plug & Play Kit DSP Amplifier & Subwoofer & Speakers
Couldn't Load Pickup availability
Sound system for VW T6.1 | V2 PRO | DSP power amplifier + subwoofer + speakers | HD sound with design grille | OPTION
With the V2 PRO sound system for VW T6.1 (2019-2024), you get a fully tuned complete package consisting of DSP-6 power amplifier, subwoofer, PRO front speakers, door insulation and tools. Everything is harmonised and designed to achieve a significantly better sound result in the vehicle
The DSP-6 power amplifier is already equipped with the right DSP setup for your vehicle before delivery. This means you benefit from greater sound control, clean stage imaging and harmonious tuning without having to calibrate anything yourself. The subwoofer under the passenger seat adds a noticeable bass foundation to the system, while the PRO front speakers provide more detail, clarity and dynamics
The revised PRO tweeters set the tonal focus. Compared to the already very high-quality HS25AIR-VW, which is used in the standard version for the VW T6.1, they have been further optimised. Together with the 165 mm OPTION bass-midrange drivers, the revised crossover and the matching door insulation, the result is a precise, long-lasting and powerful sound
What you get with this set
- DSP-6 power amplifier: more sound control thanks to a vehicle-specific DSP setup that has already been customised for your vehicle.
- Subwoofer: more bass foundation thanks to integration under the passenger seat.
- PRO front speakers: more detail, clarity and stage thanks to the revised PRO tweeters.
- Door insulation: less resonance and tighter kick bass for more precision.
- Tools and installation accessories: clean DIY installation without additional workshop preparation.
The result is a coherent sound system with significantly more control, finer treble, more powerful bass and a visibly high-quality OEM+ look in the interior
The PRO front system is also visually impressive
- Designer grille made from brushed stainless steel
- Customised design for factory-fitted mounts
- Visible and high-quality enhancement of the interior
Specification
| Power | 6 x 60 watts RMS at 4 ohms, plus 4 x 60 watts RMS at 4 ohms plus 1 x 120 watts RMS at 4 or 2 ohms |
|---|---|
| Minimum impedance in mono mode | 1.5 Ohm |
| Frequency range | 20 Hz to 21 kHz |
| A/D converter | BurrBrown |
| D/A converter | BurrBrown |
| Operating voltage | 10.3 V - 17.5 V |
| Standby power consumption | 0.6 mA |
| Main connection | 20-pin Molex MiniFit Jr. |
| Subwoofer connection | 4-pin Molex MiniFit Jr. |
| Programming port for DSP-Eprom | RJ-45 modular jack |
| Remote control connection | RJ-45 modular jack |
| Type | 20cm bandpass subwoofer, passive |
| Power handling | 130 Watt RMS |
| Impedance | 2x 4 Ohm |
| Enclosure | High-quality bandpass construction for deep, precise bass |
| Tweeter | 25 mm fabric dome tweeter with high-quality neodymium magnet |
| Bass-midrange driver | 165 mm |
| Impedance | 3 Ohm |
| Power handling | 70 W RMS |
| Efficiency | 91 dB |
More specs
| |
What's Included
- 1 × DSP-6 power amplifier (6-channel amplifier with integrated 8-channel sound processor, incl. pre-installed DSP setup for your vehicle)
- 1 × ROCK-3 subwoofer incl. suitable integration under the passenger seat
- 1 × subwoofer remote control for level control
- 1 pair of OPTION PRO tweeters for VW T6.1 with high-quality crossover and stainless steel grille
- 1 pair of 165 mm OPTION bass-midrange speakers
- Rivets for speaker mounting
- Door insulation: 6 × bitumen mats + 2 × insulating foam panels
- Plug & Play cable set for power & signal
- OPTION Riveting pliers
- Torx set
- ARS24 remover tool
- Milling head attachment for drill
About the brand
Option Audio
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
