Option Audio VW T6.1 Plug & Play Kit 6-Channel DSP Amplifier & Rock-3 Subwoofer
Couldn't Load Pickup availability
VW T6.1 sound system (DSP) + subwoofer | V1 | Plug & Play | OPTION
The compact 6-channel power amplifier makes the original front and rear loudspeaker system and the new OPTION ROCK-3 bandpass subwoofer under the driver's or passenger's seat sing and vibrate to provide you with optimum sound quality. The system is already pre-set so that you only have to adjust the sound to your preferences using two potentiometers (high-pass front system and subwoofer level) and is installed out of sight behind the dashboard. The DSP sound system is super easy to install thanks to the plug & play principle.
The OPTION ROCK-3 offers outstanding efficiency and performance at a low weight. This subwoofer is ideal for car hi-fi enthusiasts who expect excellent bass performance in a compact format. With a power handling capacity of 130 watts RMS, it delivers powerful and clear bass reproduction that transforms your car into a mobile concert hall.
Installing the system is child's play. Start by removing the car radio or base unit, integrate our specific wiring harness and connect it to the DSP6 power amplifier and the OPTION ROCK-3 subwoofer. Complicated wiring work is not necessary, because our cable set contains everything you need.
Specification
| Power | 6 x 60 watts RMS at 4 ohms, plus 4 x 60 watts RMS at 4 ohms plus 1 x 120 watts RMS at 4 or 2 ohms |
|---|---|
| Minimum impedance in mono mode | 1.5 Ohm |
| Frequency range | 20 Hz to 21 kHz |
| A/D converter | BurrBrown |
| D/A converter | BurrBrown |
| Operating voltage | 10.3 V - 17.5 V |
| Standby power consumption | 0.6 mA |
| Main connection | 20-pin Molex MiniFit Jr. |
| Subwoofer connection | 4-pin Molex MiniFit Jr. |
| Programming port for DSP-Eprom | RJ-45 modular jack |
| Remote control connection | RJ-45 modular jack |
| Type | 20cm bandpass subwoofer, passive |
| Power handling | 130 Watt RMS |
| Impedance | 2x 4 Ohm |
| Enclosure | High-quality bandpass construction for deep, precise bass |
More specs
| |
What's Included
- OPTION DSP6 power amplifier (incl. installed DSP software)
- OPTION ROCK-3 subwoofer for T6.1
- Subwoofer level remote control
- Plug & Play cable set between car radio and vehicle (incl. power supply)
- Subwoofer cable (3 metres)
- VW unlocking key
- Unpinning tool for power cable
About the brand
Option Audio
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
