




AudioControl LC5i Pro 5 Channel Active Line Out Converter AccuBASS with ACR-1
Couldn't Load Pickup availability
LC5iPRO 5-Channel Line Output Converter w/AccuBASS
AudioControl brings you our most advanced line of LOCs yet. OEM integration has never been easier with the host of intelligent built-in features like LMC™ (Load Matching Circuit), allowing even the most finicky factory sound systems to no longer be an obstacle to great sound.
- Four channels of active speaker-level inputs (up to 40V input handling)
- Fixed and variable outputs with discrete-level controls
- AccuBASS® processing for correction of bass roll-off
- Load Selection Switch
- GTOTM Signal Sensing
- Ground Isolation Switch
- ACR-1 dash remote included
- Compact design
Installer-friendly trigger modes offer flexibility and an expedited installation time since the units can be turned on via GTO™ Signal Sense (DC offset), audio signal sensing, or standard remote 12 volt input. All PRO series products feature AudioContol’s patented AccuBASS® for restoring low frequency output diminished by factory processing, and an ACR-1 level control is included to dial in the perfect level for your subwoofer right from the comfort of the driver’s seat. The Pro series ensures that you will start with the clean, powerful signal you need to take your system from sounding good to sounding great.
Explore the full range in AudioControl.
Specification
| Speaker Level Input | 1 (4 channels) |
|---|---|
| Maximum Speaker Level Input | 40 Vrms / 400 W (20kΩ setting) |
| Input Impedance (selectable) | 20Ω, 60Ω, 20kΩ |
| Preamp Outputs | 5 (4 channels main, 1 channels bass) |
| Maximum Output Level | 9.5Vrms/13V peak |
| Output Gain | +/- 15 dB |
| Output Impedance | 150Ω |
| Total Harmonic Distortion | 0.01% |
| Signal to Noise | >124 dB |
| Frequency Response | 20 Hz – 20 kHz |
| Current Draw | 330 mA |
| Recommended Fuse Rating | 2 A |
| Dimensions | 7″L x 5.1″D x 1.14″H (including speaker connectors) |
| Weight | 1.1 lbs. |
More specs
| |
What's Included
- LC5i PRO
- ACR-1
- 20′ Phone Cable
- Speaker and Power connectors
- Manual
- Warranty
AudioControl
About the AudioControl LC5i Pro
From our tech experts at CEN
A line output converter, 5 channel, taking speaker-level signal from a factory system and producing a clean line-level signal for an amplifier, with AccuBASS to restore bass the factory system rolls off at volume.
Who it suits
Drivers adding an amplifier or subwoofer while keeping the factory head unit, which is most modern cars where the stereo is built into the dashboard.
Our tech experts advise
Factory outputs vary: some are already amplified, some are equalised in ways that need correcting at the source. We check what your vehicle actually outputs before specifying. get in touch. See car audio installation.
Explore the full AudioControl range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all AudioControl
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.










































