Dynamat Xtreme Mini Bulk Pack 5 Sheets Car Deadening Sound Proofing Damping Mat
Couldn't Load Pickup availability
DYNAMAT XTREME Trunk Boot Pack 5 Sheets 18x32 Inch 20 ft. sq. (1.85 m sq.)
Part Number: 19405
Dynamat Xtreme Trunk Kit
A good bass system in a vehicle can make your ride rattle and your bass sound distorted and of bad quality. For clear, crisp bass without the rattle, use the Dynamat Xtreme Trunk Kit. Adding Dynamat to the vehicle - especially the trunk -results in higher Sound Pressure Level (SPL), clearer bass and better all-around sound.
Dynamat is the easiest-to-apply, thinnest and lightest material for adding sound pressure reinforcement to your car's body. When the panels don't rattle and balloon, you get higher SPL and tighter, louder bass!
Road noise can also enter your vehicle through the trunk, making your ride noisy and uncomfortable. The Dynamat Xtreme Trunk Kit stops your trunk from vibrating and letting in the road noise, giving you a quiet car that feels solid.
Total Coverage: 20 ft. sq. (1.85 m sq.)
- Sheet Quantity - 5
- Sheet Size - 457mm x 812mm (18" x 32")
- Total Kit Coverage - 1.85 square metres (20 square foot)
Specification
| Series | Xtreme |
|---|---|
| Article Number | 19405 |
| Country of Manufacture | China |
More specs
| |
What's Included
- 5 Sheets (1.85 SQM)
About the brand
Dynamat
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Dynamat
More options from the same range, in stock and ready to go
Save 15% Dynamat DynaPad Roll 3/8 Inch 11mm Heavy Weight Noise Control & Heat Reduction RRP£199.99£169.99 / Save 15%Low stock
Save 4% Dynamat SuperLite Bulk Pack 12 Sheets Sound Proofing Deadening Noise Reduction RRP£249.99£239.99 / Save 4%In stock
Save 8% Dynamat Xtreme Hex Pack 1 Sheet Car Van Deadening Sound Proofing Damping Mat RRP£37.99£34.99 / Save 8%In stock
Save 10% Dynamat Xtreme Door Pack 4 Sheets Car Van Deadening Sound Proofing Damping Mat RRP£99.99£89.99 / Save 10%In stock
Frequently Asked Questions
Q: How much sound deadening do I need for my car?
A: As a guide, a pair of front doors takes around 1 to 1.5 square metres, and a full car between 4 and 6 square metres depending on coverage. The sheet coverage for this product is listed in the Specification tab.
Q: Where should I apply sound deadening first?
A: Doors give the biggest gain for both road noise and speaker performance, followed by the boot floor and wheel arches. Even a doors-only install noticeably tightens speaker bass.
Q: Is sound deadening difficult to fit myself?
A: It is one of the more DIY-friendly upgrades: panels are cut to shape, peeled and rolled firmly onto clean metal. A roller tool and panel removal tools make the job much easier, or CEN can carry out installation from our Nottingham premises.
Q: Will sound deadening improve my audio system?
A: Yes. Deadening the doors reduces panel resonance so speakers produce cleaner, tighter bass, and lowering road noise means you hear more detail at normal volumes.
