Wavtech Link500.4mini Amp OEM Compatible Compact 4 Channel Amplifier 500w RMS
Couldn't Load Pickup availability
link500.4mini 500 watt 4-Channel Amplifier
The link500.4mini has all the features of its little brother, the link300.4mini, but with 60% more power. It also has a bass EQ w/subsonic filter, and the optional linkRC remote provides for even more control.
link500.4mini
A pair of new front speakers and a subwoofer is one of the most common aftermarket audio upgrades. The link500.4mini is the perfect amplifier for this application. When used in 3-channel mode, the amplifier can produce 125 watts x 2 for the main speakers and 250 watts x 1 for the subwoofer, so it won’t lack for power. Speaking of the subwoofer, channels 3/4 have a 1-band PEQ, a subsonic filter and the ability to add an RLC to fine tune the subwoofers performance.
link500.4mini Features
- 500 Watt 4-Channel Amplifier
- 75 watts x 4 @ 4 ohms
- 125 watts x 4 @ 2 ohms
- 250 watts x 2 @ 4 ohms BTL
- Small Footprint Only 9”x4.5”x1.65”
- Adjustable Paragraphic EQ (Channels 3/4)
- Variable Subsonic Filter (Channels 3/4)
- Variable Hi/Low Pass Crossover (-12dB/oct)
The link500.4mini has Wāvtech’s link4 built-in, with internal loading and the ability to handle up to 40V of hi-level input. It also has fully adjustable high and low pass crossovers. For factory audio systems where no full-range signal is present, the link500.4mini has built-in summing, so it can handle that internally, without the need for an outboard processor. Like all Wāvtech amplifiers, the link500.4mini is start/stop system compatible.
Specification
| Frequency Response | ----------- <10Hz to >45kHz (+0/-3dB) |
|---|---|
More specs
| |
What's Included
- Wavtech link500.4mini
- Owner's manual
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Wavtech
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
