Pioneer TS-WX140DA Under Seat Subwoofer Amplifier Space Saving Car Bass Box Sub
Couldn't Load Pickup availability
Pioneer TS-WX140DA
Space Saving Active Subwoofer with built-in Class-D Amplifier utilising DIGITAL BASS CONTROL for DEEP, NATURAL and DYNAMIC controlled bass. Easy to install thanks to its small footprint. (170 W)
Powerful Bass, without losing space.
Pioneer launches another product in its generation of Class-D amplified subwoofers integrating DIGITAL BASS CONTROL. This unique feature generates three selectable Bass Modes: DEEP, NATURAL and DYNAMIC, producing 170 Watts of strong, rich, deep bass that you can feel, without giving up space. Users can easily control and customise the three bass modes directly from the supplied wired remote control, and you can easily mount the TS-WX140DA under the front seats or in the boot.
Thanks to the inclusion of Class-D technology, Pioneer’s TS-WX140DA is even easier to install, as it is capable of taking both High (Speaker Line Input) and Low (RCA Line Input) input signals, meaning you can connect it to your aftermarket or original factory fitted stereo, to easily upgrade the sound you have now.
TS-WX140DA is a small active subwoofer in a sealed enclosure, delivering 170 W Maximum power and 50 W Nominal Power.
Specification
| Frequency response | DEEP Bass Mode 20 - 200 Hz |
|---|---|
| NATURAL Bass Mode | 40 - 200 Hz |
| DYNAMIC Bass Mode | 40 - 160 Hz |
| Sensitivity | DEEP Bass Mode 95 dB |
| NATURAL Bass Mode | 98 dB |
| DYNAMIC Bass Mode | 100 dB |
| Surround | Urethane |
| Voice Coil | type Copper Round Wire 4-Layer |
| Voice Coil | bobbin type Glass Imide |
| Weight | 3,1 kg |
| Dimensions | (W x H x D) 280 x 200 x 70 |
More specs
| |
What's Included
- Powered subwoofer
- 10.5" RCA input harness (4-pin Molex plug/2 female RCAs)
- Power harness with 16.5' power and remote turn-on leads and 6' ground wire (3-pin Molex plug)
- 10A ATO fuse in fuse holder (installed on power wire)
- Wired Digital Bass Control with attached 16.25' cable (RJ-45 plug)
- 2 Mounting feet
- Cable clamp
- 2 Self-tapping screws (M5 x 18mm)
- 2 Machine screws (M5 x 14mm)
- 2 Machine screws (M3 x 8mm)
- Adhesive backed hook-and-loop pad
- Instruction Manual
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Pioneer
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
